Land Rover Series I expedition photo hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One of the Landies traversing a sketchy bridge during the 1955-1956 Oxford Cambridge Far Eastern Expedition
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: firstoverlandexp.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x135.59mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Filaments Used:
#000000 PLA+ Esun Black Transmission Distance: 0.1
#0086b3 PLA Jessie Premium Pure Cyan Transmission Distance: 2.4
#aa6f3e PLA PolyLite Pro Army Beige Transmission Distance: 1.8
#ffcbac PLA Sunlu Skin Beige Transmission Distance: 7.4
#ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Pure Cyan
At layer #12 (1.04mm) swap to Army Beige
At layer #15 (1.28mm) swap to Skin Beige
At layer #18 (1.52mm) swap to White for the rest.