AEG/Electrolux A1WYHSK2 stacking kit with pull out shelf locking piece
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spare front lock for AEG/Electrolux stacking kit, easy fix if the original breaks or goes missing.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
This is a 3D printable replacement for the AEG/Electrolux A1WYHSK2 stacking kit with pull-out shelf. The original kit has two small plastic locking pieces at the front that keep the dryer safely secured on top of the washing machine. These pieces are simple but essential — without them, the dryer can shift or move, which can be unsafe.
If you have lost or broken the tabs when moving or disassembling the tower, you can use this model to print new ones. It’s a small, practical spare that restores the kit’s function and safety.
Recommended printing settings:
- PETG
- Perimeter: 2 (0.6mm nozzle. For 0.4 nozzle you might want to add third perimeter)
- Supports on build plate only - Organic supports
- Set a generic box to the notch side of the print to give it more flexibility when pushing it in.