237 models
The model has the same dimensions as the one from Foppemoa , but you can use with this design the original filter. My air conditioner is an Electrolux Chill Flex Gold (EXP26U758CW). The cover fits probably many more models of Electrolux…
Available at: https://www.ebay.de/itm/318664437733 Update 2026/08/05: The model is NOT COMPATIBLE with AEG Electrolux AXP34 and EXP34. See below for a compatible mod. This mod enables you to turn the single hose AEG Chillflex (Pro) into a…
This is a dual hose conversion rear panel for the "Electrolux Chill Flex Pro EXP35U538CW" airconditioner. I implemented the same Electrolux connector made by wejn . It works great with his 150mm hose attachment .…
This is the slim nozzle for Electrolux Ultrasilencer vacuum cleaner that uses special shape for accessories. Print instructions Print with brim as the object is tall with small print bed contact area.
Replacement locking nut for the bottom spray arm of the AEG FFB83740PM dishwasher. The original nut (picture #2) is constructed in a way that's very weak, having a very small contact surface between the body and the threaded part. I…
AEG Electrolux 8996470604712 Condenser Tumble Dryer Foot Visit the AEG Store Print instructions For optimal results, please adhere to the following recommended print settings: Filament Type: PETG. Print Layer Height: 0.10mm Perimeters:…
Nozzle for vacuum cleaner Electrolux Ultra Silencer ZUSG3901. I made also another one for computer cleaning with a hose. See https://www.thingiverse.com/thing:2739851 Category: Household Supplies
Electrolux/Dometic Kühlschrank Lüftungsgitter Clips ohne Werkzeug
Handle on my parents' refridgerator broke off and I found a great replacement for 3d printing by @HolesAreRound, but the handle itself was too long for the specific model my parents have - I had to shorten it so that the inner distance…
Mine got broken, so I measured the original part and created a replacement. Fits my appliance great and does the job. Printed on its flat side with PETG 100% infill with organic supports.
The cover and hose ring to add an intake hose. Only fits model EXP35U538CW!!!
Thin (9 mm inside diameter) vacuum nozzle for Electrolux EUF8GREEN vacuum cleaner. The use of such a small nozzle is at your own risks (never had a problem, though). ;) The FreeCAD file is provided so you can customize the profiles.…
EN: Egg Holder for the Electrolux Fridge Designed to increase the capacity of the original six-egg holder to 15 eggs. The models come from 2018, when I published them on Thingiverse . Recommended printing parameters: Nozzle Size: 0,4…
Electrolux/Dometic Kühlschrankfach für Eura Mobil 515 Sport (BJ 1997)
This is a replacement part for the Jockey Pulley, used in Electrolux Tumble Dryers. The slide bearing has been replaced with two commonly used 608zz bearings (skateboard bearings). Use a filament that withstand some heating as the pulley…
I had my dishwasher shaft being bent and rollers weren't doing their job due to this. Basket wasn't standing on the side and and blocking lower sprayer. I designed this shaft expecially to be sturdier. Due to dishwasher temps going up to…
Vacuum cleaner adapter to standard sizes 25.4mm and 31.75mm. This model is created for electrolux EERC73SW, but probably is useable to different similar electrolux vaccum cleaners.
Print with supports 0.2mm layer height ist fine
The handle consists of 5 parts: 1x Top hinge (30mm height) 1x Bottom hinge (30mm height + 20mm pins) 1x Handle (250mm height) 2x Hinge cover (30mm height) The model uses pentagon shaped pins, to attach top and bottom hinge to the handle.…
Print with support for the Electrolux recess. OsVac neo M32 has tight tolerances around the notches and might require sanding. In case of elephants foot, smooth out the inner edges of the Electrolux compatible part. Thanks to TOKENIZER…
This replacement part is a Elextrolux fridge Lock/Latch. It's needed to lock the door during a ride and can be used to set the door in ventilation position. Category: Replacement Parts
To mount the cool 3D4U by Miele Borehole Cleaning Aid to an Electrolux vacuum cleaner with a special non-round-shape tube, you need a 34mm tube adapter. There are some designs available, but not one fitted good enough for me. So I created…
This is a replacment part for the "Halter Siebträger" component of the "AEG Electrolux EA 150" espresso machine. https://www.massinger-ulm.de/epages/61366570.sf/de_DE/?ObjectPath=/Shops/61366570/Products/4071330916 The genuine spare part…
Thanks to Andy24CZ for their design on Thingiverse (https://www.thingiverse.com/thing:2837102), I can take no credit for the design, or my very minor updates. This model was Eggs-cellent!!! Andy Designed this for his Electrolux fridge, it…
Thanks to Marugg for the Electrolux end: https://www.thingiverse.com/thing:4156831
An adapter for the Electrolux vacuum cleaners (with the rounded rectangular nozzles) that connects to a 40mm (outer diameter) vacuum hose. Vacuum hoses most likely vary a bit depending on manufacturer so there is no guarantee that it will…
This is an adapter that fits on the funky rounded/rectangle vacuum cleaner from electrolux. It lets you easily drill a hole in your wall with basically no mess. The part prints as oriented, and supports are encouraged but not required.…
This adapter attaches to the end of the standard Electrolux AC exhaust nozzle. It's made so that the extensions and vents from here can be used on the end. The locking collars simply slides onto the rims of both the original nozzle and…
Hi I present to you a replacement wheel for the Electrolux UltraOne EUOC94DB 700W Vacuum Cleaner Printed with Black Creality Hyper PLA Settings: 3 walls 10% infill print with supports (facing as shown in the picture)
I made this to level my Electrolux Washer and Drier which has 32 mm Leveling feet. Printed in PLA at 0.4mm layer height and 100% infill. It works great just make sure the feet are not tightened all the way in. Thanks for looking! Print…
Náhradní držák pro spodní koš do myčky nádobí značek AEG, Zanussi, Electrolux. (více typů) Jedná se o velmi namáhanou část myčky ( teplo a tlak). Po několika letech tato část zkřehne a začne se rozpadat. Tato náhrada je velmi levná a…
Single and double wall mount holder for accessories that come with the Electrolux Hygienic and Ultimate vacuum cleaner. Might also fit other models, but these are the ones I have seen using this type of accessories. I did notice the Bed…
There are some designs available, but not one fitted good enough for me. So I created my own, including a release mechanism, like the original Electrolux parts have. You will need the following to put the model parts together A ballpoint…
electrolux kitchen stove knob
The original funnel tended to spill the salt outside the salt container (which could cause lethal corrosion to the inox tub). This contraption fixes the problem by inserting the salt under the water level from where there is no escape.…
Our metal (cast zinc?) strike broke so I modeled this from scratch and printed it while we waited for a replacement. Worked well enough that we could do a couple loads of laundry - printed part seems like it actually holds up pretty well,…
This model replaces the wheel mounts used in most dishwashers made by the Electrolux brand group. This includes dishwashers by brands like AEG, Progress, Zanker, Zanussi, Juno, Frigidaire, Kelvinator and also some dishwasher sold at IKEA.…
Designed for an Electrolux Comfort 600 (EXP38U340HW). The cover fits probably many more Electrolux Comfort 600 models. Check the dimensions of your air conditioner first before you print. I used the adapter ring from MichaelQ model for…
Height of the holder matches height of the Ivar side plank: 40 mm. Use 25 mm screws, if the shelf is right behind the plank, screw could be longer. 20% infill, 3 perimeters, PETG recommended, print in place, no supports needed.
Dishwasher spare part 807035801 8070358018 Mounting Holder Bearing Headboard for Spray Arm For: AEG, ZANUSSI, ELECTROLUX, WHIRLPOO
If your wheels of the Electrolux broke, you can print spare one! Sometimes busket bottom also break, so I made inserts. I assume then PETG and ABS will be the best option for this project. If you will print in, please share picture! Thanks!
Adapter for Electrolux Turbo Brush (round 32 mm) to EUOC9GREEN (rectangle 40 x 36 mm) vacuum hose adapter.
Držák na na 5ks vajec. V lednici v kaslíku jsem měl držák na 6ks vajec, což mi nestačilo. Našel jsem model na 6ks stejného typu držáku a vytiskl, ale v poličce zbýval ještě nevyužitý menší prostor do kterého už se další na 6ks nevešel =>…
Electrolux 2425096 Glass Fridge Shelf Rear Trim (Spare part) Length (mm): 518mm (517mm) Hole for glass legrh: 495mm Electrolux 2425096019 EAN 7321429844253 For the split model use 3mm screws
Printed in Petg prusament with support
Print Instructions infill %100 3 Walls supports required Please look the photos.
Redukcia pre použitie nástavcov Zelmer na vysávači Electrolux. Print instructions Stred modelu je umiestnený zhruba X160 a Y160.
Electrolux vacuum adapter to baby-vac nasal aspirator. 100% infill. Printed from PETG. 0,2mm layer height.
Print with blue surfaces laying on the print bed in order to achieve best strength (see picture 4)
This is a simple adapter for using old Dyson vacuum cleaner heads (~32mm outer diameter) with an Electrolux Ergorapido. I printed mine from PETG with the round part at the bottom, but other materials and the opposite orientation should…
The model fulfills the same purpose as the original part. You can easily see how it is used in the photos. It consists of two parts that are simply screwed together. You need the following screws and nuts to mount the two parts together.…
English: This model features a 0.74mm wall thickness version, equivalent to two layers without gap fill, available in two variants: shorter and taller. Specifically designed for refilling salt in the Electrolux dishwasher model:…
I printed this knob with 4 perimeters, and 30% infill. Seems to work fine. It's a plastic knob next to fire, so obviously plan for a failure… which you should have done already since the original ones have plastic stems and those fail…
This is intended to be an “expediant” or temporary latch for an Electrolux washing machine. Tested in PLA and it held up just fine while an OEM latch took two days to get to me, but don't think it would hold up long term. A new latch is…
Our gas hob's knobs were getting quite worn out and their silver paint was starting to peel off due to extensive cleaning to get rid of stuck on grease. I decided to improve the look of our gas hob by creating replacement knobs for them.…
Simple snap-on adapter for 102mm soft hose if you want to keep the cooling unit outside: -remove rotating wing by slightly bending -remove metal safety grill by slightly bending -snap on the adapter -attach hose and add insulation, enjoy…
Replacement hose connector (and corresponding sealing) to tank for Electrolux Z 65 vacuum cleaner. Print settings for connector: Layer height: 0.3 mm Perimeters: 3 Solid layers - top/bottom: 5 / 5 Infill: 20 % Supports: yes (only support…
I made this so I can use the printable Miele tools on my Electrolux Pure D9 which has a non-standard shape. Adapter fits over the Electrolux hose and under the Miele tools. Miele tools: https://www.thingiverse.com/miele_3d4u/designs
AC remote controller holder
This is an adapter for the Electrolux Hygienic 800 vacuum cleaner, which normally uses an oval connection. Sometimes a round pipe is more practical, so I designed this adapter to allow that. The round part outer diameter is ⌀ 35 mm.…
Floor nozzle ring for Electrolux vacuum cleaner
Material: - PLA Recommended print settings: - Layer height: 0.2mm - Outer walls: 3 - Infill: at least 60% - Supports: Yes Note: Model is a little bit longer due to its shrinkage during shaping into the final position by a hair dryer.
Simple holder for floor brush and extension tube. Print instructions ============== Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% ==============
Replaces part #241993701
Vacuum cleaner part, hose end connector thing. Storing the vacuum cleaner is a pain when this part brakes. Made it for me and a couple of other people with the same problem.
Customized version of http://www.thingiverse.com/thing:97238 Instructions Using the following options: wallThickness = 2 outsideBandsaw = 24.3 vacuumLength = 50 $fn = 45 bandsawLength = 30 insideVacuum = 31.8 Category: Tools
Does your vacuum cleaner have a hanging bracket for the floor nozzle, but the hook on the nozzle is broken or doesn’t have one? If so, this 3D-printed hook bracket lets you easily hang your floor nozzle on the vacuum cleaner for…
Hose adapter for vacuum cleaner Electrolux Ultra Silencer ZUSG3901. You can use this to clean your computer (small places). You can use it with a hose of 12 outside diameter. Warning: don't use it to long because your vacuum cleaner will…
Printed these in PET and worked OK for nearly 2 years. It would be good to try something more resilient.
The original joint that connects the tube and the head on the vacuum cleaner broke, because of this the head fell off and could no longer be used. I designed the repair piece based on the sample, which fits perfectly and tightly in place…
Used the original metal “bearing” tube that came from the broken pulley Printed this in hard tough resin at 100% infill and still in use today some 12 months later.
Do not use PLA. It can deform because the heat of the exhaust air.
I made replacement hinge for my dryer Electrolux because i broke the original one … [ its number 363 on picture of dryer door ] Use [ Hinge_without_bearing ] if you won't use or if you broke pieces 367 on the picture … I recommend using…
Imagine if you will….Coming home after a long day of working in the heat and reaching for the fridge door to grab yourself a frosty cold beer. Sounds refreshing doesn't it? When you pull the door open, the handle falls off but the door…
Just a printinplace dishwasher wheel. Print it without support at 0.2mm layer hight. There is a 0.2mm gap between the wheel and clip. Breck it loose by pushing gently from the outside or rotating. I use ironing on the upper layers, that…
Electrolux changed the bayonet and the rotational direction of the blender with the n21 model. Vintage blenders for the older machines are probably made from polycarbonate. I designed the blender adapter to avoid the whole polycarbonate…
(7 August 2025) v2 - Optimized For 3D Printing Added Print with ABS or PETG Filaments Layer Height 0.2 Walls 4 Infill 30% Grid
There was nothing like this for Electrolux on the internet, so I created one. My Print Parameters: Resolution: 0.2 Infill: 15% Perimeters: 3 Rafts: No Supports: No Material: PETG, ASA, ABS, whatever
I printed it with PETG to give more flexibility. Used some support for holes but maybe it can be printed without that.
The old Electrolux assistent mixers from as long back as the 1940s are built like tanks and many are still in use to this day. The one in the picture was passed down to me from my grandmother and was as far as I understand it bought in…
I got tired of not being able to secure the water drainage hose and did this solution to be able to secure the pipe when not in use or emptying the drainage container. Use clips to secure the plate
A Spare Wheel Holder for the Upper Tray of the Electrolux Swissline Dish-Washer Printed in PET-G with 100% Infill, No Supports
The standard door latch has 2 locking positions (technically 3 positions total): Locking the door tightly closed Locking the door open slightly cracked Floating, unable to close at all This modification adds a third locking position for a…
Designed in Fusion360 Sliced by OrcaSlicer Printed on ELEGOO Centauri Carbon material - white PETG (alt. ASA, PA …) nozzle/layer - 0.4mm/0.2mm walls/top/bottom - 3/3/3 surface pattern top/bottom - concentric/concentric infill…
Replacement bottom shelf for most Rosenlew RJP fridges and some other brands and models. To see if it fits your fridge, check if the replacement part for your fridge has this SKU number: 264601903 Prints in 3 pieces with holes for…
Downloaded from https://www.thingiverse.com/thing:4765592 Handle for dishwasher, replacement piece if broken
Electrolux Power Speed Ultra STK15 Connector
Vytvoril som gombík, pretože baňa sa zlomila, možno to bude užitočné aj pre ostatných
I created this component for my coffee machine as it was broken. Print instructions I used PETG material i didn't use support material
I needed to replace a wheel on my compact dishwasher Electrolux ESF 2300. The original part number was made in PP, and had several revisioned part numbers: #1551183104, #1551183005 and #1551183013 Print with thick walls, high infill (I…
Thanks to the original electrolux_miele_adapter from @MichaelQ I had a superb model to start with. The button/unlock mechanism is gold. The only thing that did not fulfill my needs was the fact, that it could not hold the bigger…
Hello, i design and print this knobs for my kitchen hob since the original one lost some painting during this 12 years. I print then in PETG, much stronger than PLA with water and chemical product for cleaning. You will find tree version…
remixed from dvdkon model, I added a spreadsheet in the freecad file to let users set the inner and outer diameter
Inspired by https://www.printables.com/de/model/255457-ac-window-mount-flangebushing-with-hose-adapter-12 I created a 150mm Hose Quick Connect adapter to put the AC Hose thorugh a 5mm acrylic glass plate I mounted through to my window.…
A friend of mine had this part in his AEG electrolux dishwasher broken, so I remixed the nearly same part from Bosh to fit the motor. The "normal" variant sits very loose on the motor, the tight one needs a bit of power to be attached.…
Created for Electrolux LXB1SE11W0. Hopefully compatible with other Electrolux models, test for yourself. Required parts: 2x 20mm M3 Screws/Bolts, with either round or flush head (very important, so you have the clearance to close the…
Adapter for weird shaped Electrolux vacuum hose to standard circular shaped for other attachments and vacuum bags. Print vertically with suppot for inside edge
Spare fan blade for Electrolux ZE119 Spare fan blade fom Electrolux ZE119 Turbo technology - accesorry for Electrolux vacuum cleaners. Made in 5 minutes using scanner, canvas in Autodesk Fusion and scaled to proper size in Prusa Slicer.…
