Replacement for AEG Electrolux EA 150 Halter Siebträger (4071330916)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacment part for the "Halter Siebträger" component of the "AEG Electrolux EA 150" espresso machine.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 118
- Makes
- 0
- Views
- 650
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a replacment part for the "Halter Siebträger" component of the "AEG Electrolux EA 150" espresso machine.
The genuine spare part is neither produced nor sold anymore, so I created a replacment.
The inner surfaces have a design tolerance of 0.3mm. This should be fine for most FDM printers.
Copyright of the original part design is by AEG. This 3D model is a derivative work by me.
Print Settings
Rafts: No
Supports: Yes
Resolution: Adaptive Layer Height 0.1mm-0.3mm
Infill: >= 30% Rectilinear
Filament: Any Black PETG / ABS or better, PLA might melt
Notes:
Use a slicer with support for adaptive layer heights to make the inner ramp surfaces as smooth and strong as possible.
Print slow to ensure maximum layer adhesion. This part has to endure high mechanical and thermal stress.
Print with the screw plate in the air, such that the inner ramps can be printed without supports. The other screw plate lid needs supports.
Category: Kitchen & Dining