1 / 6
Electrolux Tumble Dryer Jockey Pulley
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spare Jockey Pulley for most Electrolux Tumble Dryers
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 146
- Makes
- 3
- Views
- 918
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement part for the Jockey Pulley, used in Electrolux Tumble Dryers. The slide bearing has been replaced with two commonly used 608zz bearings (skateboard bearings).
Use a filament that withstand some heating as the pulley may be hot on use in the dryer.
Need to be printed with support and a least 3 perimeters.
Post processing:
- Remove support
- Optional: Clear the thin layer covering the center hole
- Optional: Light sand the track where the belt will be running to get smooth surface
- Press fit the two bearings
Shown models is printed in Prusament PC Blend Orange and Devil Design PETG Super Blue.
2024.01.06 Update: Also works with AEG Lavatherm dryers.
>> If you like the model, please leave a like, rating or a make… ;-)