1 / 6
Electrolux Tumble Dryer Jockey Pulley — zdjęcie 1
1 / 6

Electrolux Tumble Dryer Jockey Pulley

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spare Jockey Pulley for most Electrolux Tumble Dryers

Ocena
5 / 5
Polubienia
18
Pobrania
146
Wydruki
3
Wyświetlenia
918
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement part for the Jockey Pulley, used in Electrolux Tumble Dryers. The slide bearing has been replaced with two commonly used 608zz bearings (skateboard bearings).

Use a filament that withstand some heating as the pulley may be hot on use in the dryer.

Need to be printed with support and a least 3 perimeters.

Post processing:

  • Remove support
  • Optional: Clear the thin layer covering the center hole
  • Optional: Light sand the track where the belt will be running to get smooth surface
  • Press fit the two bearings

Shown models is printed in Prusament PC Blend Orange and Devil Design PETG Super Blue.

2024.01.06 Update: Also works with AEG Lavatherm dryers.

>> If you like the model, please leave a like, rating or a make… ;-)

Tagi