1 / 7
Bigtreetech SKR2 + Rasperry Pi Zero 2 + Noctua Fan Enclosure for Ender 3 v2 — image 1
1 / 7

Bigtreetech SKR2 + Rasperry Pi Zero 2 + Noctua Fan Enclosure for Ender 3 v2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is an Electronics front enclosure for Ender 3 V2, it is designed to fit: Bigtreetech SKR 2 Raspberry Pi Zero 2 1x…

Rating
5 / 5
Likes
4
Downloads
19
Makes
1
Views
1,005
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

This is an Electronics front enclosure for Ender 3 V2, it is designed to fit:

Bigtreetech SKR 2

Raspberry Pi Zero 2

1x Noctua Fan 92x10

Needs the feet extensions already installed.

For specific to the parts I had available and the limited length cables I had. It's very difficult to work on once it's in.

I'm making improvements over time but it's big & expensive to keep printing for small changes.

Related Klipper config via my GitHub repo: https://github.com/simeonpashley/klipper_config

Print Settings

Notes:

I printed it in Hatchbox PETG for improved heat resistance but it's very flexible, which is noticeable when mounting and the whole thing flexes.

While eSUN PLA+ is much stiffer, I wasn't sure on how hot it was all going to get so plumed for PETG.

How I Designed This

I made a lot of variants to get to this point as the whole thing is very densely packed and there's no room for changes. I tried inverted (same as the stock mount) and various positions & orientations.

Specifically aimed to keep the cables as close to the back-left as possible as I run a Hemera direct drive and the provided cables barely reach this position.

rPI zero 2 mount is separate and fixed with 2.5mm screws through the front grid.

From front - grid of holes are partly air flow, partly where the rPI is mounted

right said - just a 92mm noctua. Optional shelf ledge

Left side, tightly packed. SKR, rPI Zero 2 and buck converter for fan

From right looking under Y rail

From left looking under Y rail

Category: 3D Printers

Tags