1 / 11
Turbiter-SHT32 V3 back mount (E34M1 Toolhead)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turbiter-SHT32 V3 back mount The idea is from Turbiter project
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Turbiter-SHT32 V3 back mount
The idea is from Turbiter project.
I wanted to print a Turbiter with an SHT36 v3 mounted on the back easily.
So i designed it from scratch.
You will need:
2x m3x16 hex screws
2x m3x22 hex screws
2x m2x4 Philips screws
4x m3 nuts
2x m3x4x4.2 heat inserts
I used Mercury One project print settings.
p.s: i made one more design with one notch larger to be able to take out the cable of the filament sensor easily