1 / 5
Topping DX5 II under desk mounting bracket v1.0
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brackets for Topping DX5 II to mount under the desk using double sided tape + two pc psu mounting screws
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 93
- Makes
- 1
- Views
- 548
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Brackets for Topping DX 5 II. v1.0
I used double-sided tape to attach it to the desk, but some strong adhesive glue would also work. I had two PC PSU screws lying around that fit the holes on the back. This way, you can unscrew them and slide the device back if needed. The brackets are just slightly shorter than the device, so the screw can really hold everything together and prevent it from rocking back and forth.
Print settings:
- 15% infill
- 0.2mm layer
- regular SUNLU PLA filament (white mat)
- Bambu Lab a1 mini