1 / 2
Holder for Rechargeable Lithium D Cell Batteries, Charging Block, and Quad USB Charge Cable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Storage holder for 5 cell and 8 cell batteries with a place for the cable and block using minimal filament.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
I made this to keep everything together in one place. The cable holder is 9 X 16mm, the block holder is 24 X 38mm, and the battery diameter is 33.5mm but all sizes are a little less due to plastic shrinkage. It stands 30mm high. Very little infill, with 3 walls it is nearly all solid plastic. I adapted the 8 cell to a 5 cell for anyone needing a smaller holder. I have not printed it, but it is the same minus 3 cells. I printed the model in PLA with no special settings.