1 / 9
10" rack panel for NiPoGi EssenxE1 (1x/2x)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 10" rack panel designed to hold one or two NiPoGi EssenxE1.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 59
- Makes
- 1
- Views
- 327
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A 10" rack panel designed to hold one or two NiPoGi EssenxE1.
The PC fits and can be screwed in place in in both directions.
After printing i realized that there is no air intake possible at the bottom of hte case so i used 1mm spacers.
With spacers the PC Case top is about 2.5mm higher then the front panel, without spacers its about 1.5mm higher.