1 / 24
Team Raffee Landrover Discovery Gen 1 - Body Parts / Update 26.09.2026 - Interior 2.0 — image 1
1 / 24

Team Raffee Landrover Discovery Gen 1 - Body Parts / Update 26.09.2026 - Interior 2.0

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My current project is finished, and perhaps someone is interested in the custom parts. Read the description.

Rating
0 / 5
Likes
12
Downloads
58
Makes
0
Views
644
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

General Description:

  • L and R mean left and right. Most parts are available for both sides; if not, they must be mirrored in the slicer.

  • The body sits on my custom SCX10 chassis. You can also find it here on Printables.

Parts description - SCX10II Body Mount:

  • Remove the original body sliders. The new floorboards/body mounts will go in these locations.

  • Drill 2.5mm holes through the mounting point into the body. Now screw M3 screws directly into the plastic of the body.

  • Take a look at the photos.

Parts description - Fender:

  • Designed for 110mm wheels.

  • Requires cuts to the body.

  • Print in ASA or ABS and then bond it to the body with ABS adhesive. Extremely durable.

Parts description - Roofrack + Half Roof Box:

  • A roof rack with an optional roof box to put useless scale stuff on.

  • The original holes are used at the front and center. New ones must be drilled at the rear.

  • Secure with M2 screws and nuts. Except for the front, screw the screws into the rails from below.

  • The middle part must be printed three times.

  • The Roof Box is connected to the Roofrack with M2 screws.

Parts description - Interior 2.0:

  • Designed for SC10II with LCG gearbox. Other chassis not tested

  • Absolutely not true to the original, but that's all I can do with Fusion at the moment.

  • If desired as a left-hand drive, mirror in the slicer.

  • The dashboard must be glued into the existing openings and can be used without the rest.

  • The base is screwed (M3) to the sills (you have to drill holes) and can also be screwed to the dashboard (M3).

  • The mounting brackets for the bed are glued to the body. The bed itself is then screwed (M3) or glued to the brackets/mounting angles (look at the pictures).

  • I closed the tailgate with magnets (neodym 15x3). That's what the tail_lock is for.

Parts description - Magnetic Door & Hood Lock:

  • The original locks were too fiddly. Here's a very sturdy alternative.

  • Requires 15x3mm neodymium magnets (glued in).

  • Please refer to the pictures to see how they are attached to the body.

  • The door parts require cuts on the body and door.

Parts description - RCRUN LC80 Parts:

  • I use the RCRUN LC80 bumper here, for this is the adapter to the AXIAL SCX10 Gen1 & 2.

  • I also use the RCRUN LC80 spare wheel holder, which has a clamp that is screwed to the door (M2 screws).