TRX4M pull sled 1/18 scale
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
made this because I cannot find any that are free and dont use alot of small parts.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 26
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
all you need is 1/16th tactical cord and 4 m4-16 screws and a lighter for the ends of the cord.
instructions:
run some para cord through the weight box hole in the slider part on the bottom. then use some filament in the 2 of the 3 holes in the front of the rig to make a pully for the cord to run back to the wheels. run it through the 2 bottom ¼ inch holes to the wheel assembly and run it through the hole in the middle of the shaft. Useing a lighter helps so you dont need knots just melt the ends. then put the wheel assembly together with 2 keepers and 4 screws. then add some weight and pull. 5 pounds should be good. steel is suggested but optional. and have some weight in the lower sled bed so it cant wheelie.
added a tpu pad super glue to the bottom of the sled