TRX4M pull sled 1/18 scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
made this because I cannot find any that are free and dont use alot of small parts.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
all you need is 1/16th tactical cord and 4 m4-16 screws and a lighter for the ends of the cord.
instructions:
run some para cord through the weight box hole in the slider part on the bottom. then use some filament in the 2 of the 3 holes in the front of the rig to make a pully for the cord to run back to the wheels. run it through the 2 bottom ¼ inch holes to the wheel assembly and run it through the hole in the middle of the shaft. Useing a lighter helps so you dont need knots just melt the ends. then put the wheel assembly together with 2 keepers and 4 screws. then add some weight and pull. 5 pounds should be good. steel is suggested but optional. and have some weight in the lower sled bed so it cant wheelie.
added a tpu pad super glue to the bottom of the sled