1 / 17
Overengineerd 45° Led profile (13mm wide LED strip) — image 1
1 / 17

Overengineerd 45° Led profile (13mm wide LED strip)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This modular 45° LED profile is designed for efficient FDM printing and clean, directional lighting Corners to!

Rating
5 / 5
Likes
40
Downloads
334
Makes
3
Views
1,217
Reviews
4

Updated at source:

Model information

Category
Home Decor
License
Standard Digital File License

Hi! I designed this in my free time and would really appreciate it if you could leave a comment or share a make after printing it. It means a lot to me and gives me motivation to make more items :) Thanks!

This modular LED strip bar is designed from the ground up for clean aesthetics, efficient 3D printing, and easy assembly. With a built-in 45-degree mounting angle, it's ideal for indirect lighting — such as where ceiling meets wall, or under cabinets and shelving.

The system is fully modular, allowing you to build custom lengths using standardized segments. Whether you're illuminating a short section or spanning several meters, this design offers maximum flexibility with a seamless appearance.

#Update: Screw module added so instead of tape you can screw it in place.

🔧 Key features:

  • For 13mm wide led strip.

  • 45° angle for optimal directional lighting.

  • Clean, modern design with no light bleeding between segments.

  • Segments connect easily with tapered alignment pins — no tools needed.

  • Optional use of superglue between parts for enhanced rigidity.

  • Includes a slightly raised diffuser that extends beyond the housing, improving light spread and adding a distinctive visual edge.

 

🛠 Printing guidelines:

Layer height: 0.2 mm

Nozzle size: 0.4 mm

Supports: None required

Bed adhesion: Important – use glue stick or suitable bed adhesive

 

Print orientation: 

  • A1 Base: Standing up

  • B1 Diffuser: Flat

  • C: Standing up (Connecting 2 segments you need C1: 2x, C2: 1x & C3: 1x)

  • D: Flat

  • E: Flat

 I did not test te corner pieces so you have to figure that out.

Assembly

Start at the 5th picture and use the rest of the pictures to correctly assemble the LED profile.

If you have any feedback or questions, feel free to let me know. If you made this and like it, please support me by leaving a like or post a make.

Happy printing :D

Note: Scaling the parts in length is not recommended due to the design. If scaling is necessary, do not exceed 10%.

Tags