Easy Commoodore 64 "breadbin" back clips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
i was not able to find an easy breadbin repair clip that i could use with superglue so i created one.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
I tried to use one of the available "bread bin" clip i found on the internet but the one i found needed either invasive modification or they were difficult to align so i came up with a quick and dirty solution that also allowed me to preserve the existing clips if the aim is only to reinforce them.
Basically the idea is to print the latch, then heat the lower part until it gets soft and then push them inside the empty channel between the existing clips, if original one is still there is it possibile to use it as alignment otherwise there is a notch to be aligned to the plastic case. once the printed clip is cool it is possible do use superglue to attach it (clamps strongly suggested anyway).
print on the side with brim and use deburring tool to remove it afterwards