Anycubic Ace Pro back panel container holder for silica gel or molecular sieves
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Anycubic Ace Pro back panel container/holder for silica gel or molecular sieves
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 204
- Makes
- 1
- Views
- 1,426
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
I love it when my filament is perfectly dry, so I do everything I can to achieve the lowest possible humidity inside my Ace Pro.
I'm presenting a container for silica gel or molecular sieves. I personally use 4A molecular sieves and consistently achieve a very stable humidity level of 2–4%, which perfectly protects my filament spools.
The container is mounted on the rear wall of the Ace Pro door. I used Tesa Powerstrip velcro strips for mounting, but you can use any other temperature-resistant strips.
Printing Details
The container is printed in three elements: the front grid, the container body, and the container cap (for easily pouring in and out the molecular sieves).
The front grid should be glued into the container body—I used T-7000 glue.
Print only with PETG/ABS/ASA, as these are the only suitable materials.
Recommended Print Settings
Layer height: 0.2mm
Top and bottom layers/shells: Set to 0 (This is a crucial detail)
Infill: 40-45%
Infill pattern: Very important—set the infill type to Honeycomb.
You can also use my ready-made printing profile in the 3mf file.