Large Incense Stick Holder (Fits Murphy's Naturals Mosquito Repellent Incense)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An incense holder big enough to fit large incense sticks, such as Murphy's Naturals Mosquito Repellent Incense
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 63
- Makes
- 1
- Views
- 184
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I got sick of digging in the lawn to pull up the sticks from burned-down mosquito incense (or trying to find a plant pot to stick them in on the upstairs porch), so I decided to print a holder. The one jurassic73 designed was nearly perfect; I just scaled up the X and Y dimensions of the middle part to fit my larger incense sticks. (I also made the dish overall exactly 130mm wide in both of those directions; originally there was the teensy-tiniest difference between X and Y.)
The stick on Murphy's Naturals mosquito incense is about 3.7mm in diameter, with about 45mm of bare stick at the bottom. The holder on this version has a hole diameter of 3.91mm and a hole height of 40mm. (Because the incense sticks can splinter at the bottom, I found that a 3.8mm diameter hole was a little too tight to be a comfortable fit every time, while 4.0mm was too loose. But 3.9 is just right!)
Reminder: Mosquito repellent incense should only be used outside.
(Also, I have no idea if Murphy's incense actually does anything. We have a Thermacell that does the heavy lifting, and I would highly recommend one of those to anybody. But the incense sure does smells nice!)