Large Incense Stick Holder (Fits Murphy's Naturals Mosquito Repellent Incense)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An incense holder big enough to fit large incense sticks, such as Murphy's Naturals Mosquito Repellent Incense
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 184
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got sick of digging in the lawn to pull up the sticks from burned-down mosquito incense (or trying to find a plant pot to stick them in on the upstairs porch), so I decided to print a holder. The one jurassic73 designed was nearly perfect; I just scaled up the X and Y dimensions of the middle part to fit my larger incense sticks. (I also made the dish overall exactly 130mm wide in both of those directions; originally there was the teensy-tiniest difference between X and Y.)
The stick on Murphy's Naturals mosquito incense is about 3.7mm in diameter, with about 45mm of bare stick at the bottom. The holder on this version has a hole diameter of 3.91mm and a hole height of 40mm. (Because the incense sticks can splinter at the bottom, I found that a 3.8mm diameter hole was a little too tight to be a comfortable fit every time, while 4.0mm was too loose. But 3.9 is just right!)
Reminder: Mosquito repellent incense should only be used outside.
(Also, I have no idea if Murphy's incense actually does anything. We have a Thermacell that does the heavy lifting, and I would highly recommend one of those to anybody. But the incense sure does smells nice!)