Simple Safety Glasses Mount 14mm wide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple safety glasses mount to screw to the cabinet or wall. Counter sunk #6 screw holes.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 41
- Makes
- 0
- Views
- 220
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Simple safety glasses mount to screw to the cabinet or wall.
Counter sunk # 6 screw holes.
Spent way to much time with the caliper at Home Depot determining the average width and height of the center section. Should work with almost every folding style safety glasses on the market.
My first upload to prusaprints.
Kinda a no-brain'r but.... print facing down like in the image to avoid supports.
3 layers on the outer....Also did this with a 60% infill in a gyroid pattern even though that's pry overkill.
6 months later and still holding up great in PLA+