GIMX Adapter Case (Arduino Pro Micro type C + FT232RL)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small casing i designed to fit the components of the GIMX adapter
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 34
- Makes
- 0
- Views
- 239
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a case for my Gimx adapter, so I built one. It consists of three parts: the main case, a separator and a cover.
The used parts contain:
- Arduino Pro Micro Type C
- FT232RL
- Small wires
- And the 3d Printed case parts
Instructions:
-First, the two circuit boards need to be soldered together. Short flexible cables make assembly easier later on.
-Next, the soldered circuit boards need to be fed through the opening in the separator and then moved into their final orientation.
-The circuit boards are now inserted into the housing together with the separator.
-Once everything is in place, the housing can be closed with the cover.
Visual instructions can be found in the image gallery.