GIMX Adapter Case (Arduino Pro Micro type C + FT232RL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small casing i designed to fit the components of the GIMX adapter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a case for my Gimx adapter, so I built one. It consists of three parts: the main case, a separator and a cover.
The used parts contain:
- Arduino Pro Micro Type C
- FT232RL
- Small wires
- And the 3d Printed case parts
Instructions:
-First, the two circuit boards need to be soldered together. Short flexible cables make assembly easier later on.
-Next, the soldered circuit boards need to be fed through the opening in the separator and then moved into their final orientation.
-The circuit boards are now inserted into the housing together with the separator.
-Once everything is in place, the housing can be closed with the cover.
Visual instructions can be found in the image gallery.