35 modeli
Remixed top half of Moyina FT232 USB to TTL Adapter, USB to Serial Converter Case by @scorf and added 3d text that was inspired by USB to FTDI Adapter Case - with pin labels by @MyStoopidStuff The text is “upside down” but just right for…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For the realization of this small box you will need: USB converter: https://www.gotronic.fr/art-convertisseur-usb-serie-ft232rl-gt1125-26140.htm Wires with their X6 connectors of your choice. Model used in my case:…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A OpenSCAD case for AZDelivery FT232RL adapter, to fully enclose the adapter, with "pad" to ZIP-tie the jumper cables. Originally the ZIP-tie pad was flat, but it was way too easy to break it off. Then I changed to this triangular-ish…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
Simple case for FTDI FT232 USB to TTL Serial converter module. For simpler usage, it contains also description of pinout and output level switch. Designed in OpenSCAD. Printed on Alfawise EX8 with Alfawise PLA, which explains not so nice…
this is a housing for a usb-serial converter I recommend ISO7380 M3x6mm screws, but the print also provides clip-in without screws Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0,2mm…
A case for a FTDI Adapter FT232RL. Pretty tight fit. https://cuitbuilts.wordpress.com/2018/03/04/ftdi-adapter-ft232rl-case-3d-print Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts: No Supports: No Resolution: 0.2…
This is a simple casing for the "Adafruit FT232H IO" board. The SCAD files can be downloaded here https://github.com/andimoto/case\_adafruit\_ft232h Assembling the case with 2mm or 2.5mm screws. Print instructions Category: Electronics…
Housing for the PCB from Waveshare. If printed with transparent filament, LEDs are still visible. Clueing both parts togehter is optional, as the fit quite fine.
i changes it a littlefit to make it suite to my ft232rl board
A minimalistic case for the USB-TTL module HW-417, which uses FT232RL. This is widely available on AliExpress and co. The modul needs no support and assembly is done without screws or other tools. Printing: Layer height: 0.2mm Infill:…
Inspired by the original design by plasmata this case is redesigned from the ground up to fit the current Moyina FTDI to Serial USB adapter . It exposes the pin markings on the board for easy connection ID and is a bit shorter than the…
A simple case that I made for the FT232BL board with USB-A.
The enclosure is for the FT232RL based USB-serial converter board sometimes referred to as YP-05. It has a six pin header at the short side, with pins for GND, CTS, VCC, TX RX and DTR. A jumper allows selecting 5V or 3.3V for VCC. My…
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
Snap fit case for a common FTDI TTL Serial Module. All the cases I could find were press fit (didn't stay together) or required screws. Plenty of clearance around the USB port and the pins to allow space for connectors. This case snaps…
Snap fit, no hardware required. It's a tight fit for the PCB, which ends up helping hold it in place.
remixed from https://www.thingiverse.com/thing:3789215
A simple case that I remix for the FT232RL board with USB-A.
Snap fit case - keeps it on securely, but can be pried off to change voltage level from 3.3V to 5V :)
I needed a case for my Gimx adapter, so I built one. It consists of three parts: the main case, a separator and a cover. The used parts contain: - Arduino Pro Micro Type C - FT232RL - Small wires - And the 3d Printed case parts…
A housing to fit a cheap USB-C to UART adapter. This is a remix by modification of the original FreeCAD files of the mini-USB version. Changes: redrawn the USB-C connector opening added recess with generous clearance around connector…
Remixed version of the @Adafruit Snap Fit Case for Feather RP2040 Scorpio for their FT232H Breakout . Modified to fit the smaller FT232H breakout and added options for no mounting tabs on bottom and embossed name. Removed mounting holes…
A small box for the Sparkfun FT232R breakout board, useful when you need just the Tx and Rx lines. Printed in transparent PETG, so the lights are still visible. Make sure your board fits, as the box is quite tight. The OpenSCAD source…
A sliding case for an FT232 USB to Serial programming unit with storage for micro clip leads. Inspired by the case @jattie released for a serial programmer, I built this from the ground up to accommodate test clips and a slightly longer…
This is a case to house the serial adapter to run the ptt for a trusdx ham radio from a laptop computer. like a remote control with a bigger ui. this case nicely houses the whole entire board and audio jack adapter in a single dongle.…
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
Remixed version of the @Adafruit Snap Fit Case for Feather RP2040 Scorpio for their FT232H Breakout . Modified to fit the smaller FT232H breakout and added options for no mounting tabs on bottom and embossed name. Removed mounting holes…
A sliding case for an FT232 USB to Serial programming unit with storage for micro clip leads. Inspired by the case @jattie released for a serial programmer, I built this from the ground up to accommodate test clips and a slightly longer…
Snap fit, no hardware required. It's a tight fit for the PCB, which ends up helping hold it in place.
A OpenSCAD case for AZDelivery FT232RL adapter, to fully enclose the adapter, with "pad" to ZIP-tie the jumper cables. Originally the ZIP-tie pad was flat, but it was way too easy to break it off. Then I changed to this triangular-ish…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
The enclosure is for the FT232RL based USB-serial converter board sometimes referred to as YP-05. It has a six pin header at the short side, with pins for GND, CTS, VCC, TX RX and DTR. A jumper allows selecting 5V or 3.3V for VCC. My…
A housing to fit a cheap USB-C to UART adapter. This is a remix by modification of the original FreeCAD files of the mini-USB version. Changes: redrawn the USB-C connector opening added recess with generous clearance around connector…
