Case for FT232 FTDI USB 3.3V 5.5V to TTL Serial Adapter Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap fit case for a common FTDI TTL Serial Module. No screws required. Grips board in place.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Snap fit case for a common FTDI TTL Serial Module.
All the cases I could find were press fit (didn't stay together) or required screws. Plenty of clearance around the USB port and the pins to allow space for connectors.
This case snaps shut tightly. It has little wedges at the sides of the board to hold it tightly in place in the case too. Depending on printer tolerances,you may have to use pliers to open it.
The top of the case is thin so it will show the LED's.
It is suitable for the USB-C / Mini USB version. For example: https://www.aliexpress.com/item/1005006445462581.html
Edit: Added 3 different bases. The only difference is the cylinders that grip the PCB. The size is the diameter of the cylinders.