15 798 modeli
Something quick, because of course I had to make an entry for the jointed figures competition! This snap-fit model starts as a one-inch cube and flips inside out to reveal a cute, spiderlike robot. Instructions The 3MF file has all the…
This Young little cattle leans his head to one side Please make sure that you putt some supports under the belly and maybe on the front seeing left horn.
The print requires no supports and consists of only two parts. Simply snap the hook into the wasp trap. Pour water mixed with sugar and a bit of vinegar into the PET bottle. Then screw on the printed part and place the bottle on a table…
As an example what is possible to print with our Colorprint we designed Prusa Bottle Opener :D. The print is supposed to take approx. 30 minutes and the printer will ask for filament change with beeping after 25 minutes. Don’t forget to…
Keep your cleaning supplies organized with this practical spray bottle holder. Perfect for storage rooms, cleaning cabinets, garden sheds, or workshops. Designed for easy wall mounting using two M6 screws, this holder secures most…
Print: I printed with PETG with 0.3mm and variable layer height (because of thread). A brim is recommended. Food safety: at own risk. Depending filament and print. Please let me know your experience. 2024.5.06: version without air…
This is a two handed battle axe for Dummy 13. It is about 80x30mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my…
A practical 3-piece funnel set designed to screw directly onto standard PET bottles. 🔄 Each funnel connects using a built-in bottle thread — no slipping or holding required 📏 Available in three sizes: 77 mm , 112 mm , 147 mm 🧴 Ideal for…
3D scan of skull found on the Battle of Visby, where on 27th of July 1361 the Danes fought Gutnic Peasants. The human skull found at the Battle of Visby is a grim reminder of the brutality of medieval warfare. The skull shows clear…
Hello everyone, here are the print instructions: 0,3mm 5 perimeters (for additional strength) 100% Infill PLA or PETG (PLA is strong enough to open countless bottles) No supports needed Happy Printing and Na zdraví!
Drink holder that clamps to tables. The holder has a large diameter to accommodate a large range of cups and bottles. After printing, simply slide the cup holder into the table clamp from the side. There are two parts at the back of the…
The bottle opener assists people with arthritis, limited finger dexterity or other disabilities to open standard water bottle caps (⌀ 30 mm or 1.18 in). The device provides a large gripping surface and clamps onto the caps of standard…
All Things STL wine bottle holder: Does require 2 small tree supports. There are two different models one for 200x200 plates and one for 220x220 plates. If you have a Prusa (or this size printer) print the 200x200 If you have a larger…
This is a bottle spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for standard european bottles (PET and glass). The spout is fastened with a knurled…
This Bottle Cage is designed for 3D printing from ASA material, which is UV light stable, and then it is the best material for outdoor use. While printing, we recommended using the skirt in full high of the 3D model. The inner diameter…
I designed this universal bottle cap opener with a lever-based mechanism for easy opening of water bottle caps ranging from 27-35 mm in diameter . Use 3 perimeters + 30% infill. 🔹 Features: ✅ Ergonomic Lever Design: Uses a simple…
I saw this type of wine stand a few days ago but could only find it made of wood, so I decided to design my own. I printed several until I found one that fit most of the bottles I had, printed quickly, and was sturdy. I incorporated a…
Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…
Print it in yellow, fill bottle with some orange juice (and a splash of vinegar) - fruit flies like yellow a lot
— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
Weathered Rusty Nuka Cola Bottle Cap Make it into a keychain or a coaster. Good Candidate for Drybrush Technique.
Author: Dominik Cisar https://www.prusaprinters.org/social/7/prints The Man. The myth. The legend. Little Josef Prusa Character, designed at the occasion of the Original Prusa MULTI MATERIAL UPGRADE 2.0 release. The model consists of…
This ergonomic bottle opener is designed to easily twist off caps ranging from approximately 26mm to 34mm in diameter . Ideal for people with reduced hand strength, such as seniors or children, it features a well-shaped handle that offers…
PRINT PROFILES - I have added new print profiles with different diameters for larger and smaller caps. I recommend printing the M size first and then deciding which size is ideal for you. XXXS - 28,6 mm diameter XXS - 28,8 mm diameter XS…
I've been riding with one for almost 2 years. Holder fits bottles with 77 mm diameter. Maximum spacing for bolts is 68 mm. Minimum bolt spacing is 43 mm. Printable out of PETg or ideally PETg with carbon fiber (gcode here). Supports and…
***Update*** I have uploaded versions with a smaller overall diameter. I have a SodaStream Duo and it came with one plastic bottle and one glass bottle. I wanted to have a stand for them to let them dry upside down. So I did some changes…
This is a more elaborate bottle opener (using the same basic profile from my OpenScad Bottle Openers here ) which aims to be used with only one hand. Tip: Use your thumb to keep the opener in place. There are two similar designs:…
Princess Luna from My liitle pony serial Printed from Prusament PLA mystic blue. Modes has extra supports for parts whitch need solid fixing. 3 perimeters infill 15% brim 7mm source of model: https://ponysfm.com/
This stand is made for the drying of SodaStream bottles. Multiple stands can be stacked , regardless for which bottle. Currently there are models for the following bottles: SodaStream DUO plastic bottle (30 mm inner diameter) SodaStream…
Rainbow Dash From TV serial My Lille Pony 11cm height Print instructions Model has Extra Supports for spiky tail, Printed from PLA Prusaments 4 perimeters infill 15% brim 7mm supports distance 3mm
Now out! The HMS Hood that was sunk by the Bismarck! Get your model here: https://www.printables.com/model/776292-hms-hood (Printing and assembly instructions below) The German battleship Bismarck! Named after Otto von Bismarck and the…
This took a little experimentation (fluid dynamics and water tension… what a fun pair of things you are!) but now you can enjoy recycling your old bottled water containers into watering cans! These are perfect for indoor plants and…
Extrusion machine which allows plastic bottles (PET) to be recycled into printable filament for a 3D printer. I have made a guide in .pdf format, which summarizes all aspects of the machine with information.…
Use this cap and a bit of 4mm PTFE tubing to turn any common PET pop bottle into a squeeze-to-squirt “lab bottle”. Prints without support in any rigid material. Either cut the washer out of an old inner tube, rubber sheet or print in…
There are already several Seahawks logo models on the internet, but I wasn't happy with the quality of them. The smooth curves always had straight segments which ruin the look, especially when scaled large. So, I made my own version from…
Bracket for a bottle. Fits on a IKEA Skadis Board. Base on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 50mm inside diameter You can find the whole IKEA Skadis pegboard one my blog (article is in…
This stackable and interlocking bottle rack is perfect for reusable water bottles, wine bottles, travel mugs, and any other circular object with comparable diameter. The cell has a little more internal space than similar storage systems,…
CArts Little Acro Span: approx. 1200 mm Body length: approx. 720 mm Take-off weight (LW-PLA): approx. 450 g Drive: brushless motor (up to 28mm diameter, 25mm length) Propeller : folding propeller Battery: 2S-3S Lipo 500-1000 mAh Controls:…
Twilight Sparkle from TV serial My Little Pony model has extra support for tail Print instructions Printed from Prusaments PLA 4 perimeters infill 15% brim 7mm supports distance 3mm
Easy and quick to print !! Print in Place
I have made bottleopeners before but this is, maybe, final version. All are 40 x 90 x 6mm, for the coin-versions the diameter and height differs. Print with 100% infill for strength. When you open a bottle, hold your whole hand around the…
[ENG] A small Bobcat with freely rotating wheels and a moving shovel printed in one piece. It is printed in the "on its side" position so there is no need to add supports. For functional printing, the first layer and flow must be properly…
Little Yoda coffee mug coaster D= 10 cm
A model of a standard, easy-to-print SodaStream cap. I didn't use supports, but if you don't mind taking them off, print quality could be better with them. There are two ways to print this model. One is to print out the complete cap in…
SodaStream Glasflaschenständer zum trocknen
Standing Applejack From My Little Pony TV Serial 11cm height Print instructions Printed from Prusament petg prusa orange 4 perimeters infill 15% brim 7mm supports distance 3mm
A funnel that attaches to a bottle for a clean easy pour
Description 2 sizes - nozzle diameter 3.5cm (19 holes) and 5cm (37 holes) This watering cap is designed to fit commonly used PET bottles of various sizes. It also includes an Anti-Vacuum System (AVS) . Thanks to this, when you start…
printable without supports for better quality recomended to print with 3 perimeters and layer height ≤ 0.2 mm detail profile rather than speed for speed profile use model with bigger holes, smaller holes could be filled 45° angle has…
IKEA Skådis bottle holders in sizes from 15mm to 120mm. The bottle holders uses the flexible and strong Skadis generic connector . Just attach a Skadis generic connector to your Skådis board and then mount the bottle holder on the…
One piece Luffy little boy! Original part : https://www.thingiverse.com/thing:4491661
A universal stopper for most bottle sizes, for soda, beer, wine or other bottles. It keeps your bottles neatly in place. You only need 0,6 meters of filament to 3d-print one single Bottle Stopper!
This ergonomic bottle opener is designed to easily twist off caps of various sizes. With four different diameter slots to choose from, it adapts to a wide range of bottles and small jars. Ideal for people with reduced hand strength, such…
Just a simple little box that I drew up to hold my ear plugs when I ride my motorbike. It is a hinged print-in-place design. I tried printing it with a 0.4 nozzle, .20 layer height but it was too corse, the hinge just broke because it all…
Two waterers which use a PEG bottle. The smaller one is suitable for chicks and bantams, the bigger one is for adult chickens. Print vertically and use 4+ perimeters to make the print watertight. The bigger waterer can be used with both…
The model consists of car body, large wheels, small wheels, large off-road wheels and new small off-road wheels, robust screws as semi-axles, car key serving as a socket wrench and smaller wrench with handle. It is fun for kids to change…
< Beep bada beep AI is loading... > Is it a top secret stealth aircraft? Or is it a gate to another dimension? No! It's the next big thing since sliced bread! Inspired by hardcore gamers all around the world.... With edges so edgy it will…
Dieser Geist Flaschenöffner lasst sich leicht drucken.Als Metalleinsatz habe ich einfach eine M6 Unterlegscheibe 18mm im Durchmesser und 1,60mm Dick genommen. This ghost bottle opener is easy to print. As a metal insert I simply took a M6…
replacement for IKEA EKOLN I've added two versions: -0.8mm wall thickness -2.8mm wall thickness For some translucent filaments (e.g. some PETGs) the 2.8mm wall thickness is the better option let me know if you need a different wall…
These are the settings for a wrench to open Dr. Pepper bottle caps (and most likely many other brands). diameterB: 31.1 toothCountB: 24 toothHeightB: 0.7 toothWidthBottomB: 2.3 toothWidthTopB: 0.7 toothCurveB: false ringThicknessB: 2…
Its that time of the year, lots of birds around my home & work so I created this bird feeder that utilizes the PRUSAMENT spool half as a perch for the birds. The threads are PCO1881 specification, so it should fit most soda bottle types.…
The two parts of the jetpack must be glued. Requires adapter (included) between grip and hand.
[EN] I liked the minimalistic approach by Franco for his six pack beer bottle carrier. But I don't like to use 100% infill and want a more organic look. I also added a 2-pack and a 4-pack to the 6-pack because sometimes you are not that…
A spiral vase design - for flowers or other decorations I recomend to print it in vase mode, or with 2 to 3 outer layers, no infill and no top layers. It works pretty good.
A simple bottle dryer to plug together and save space in the closet. Based on the v2 design of https://www.printables.com/model/382554-bottle-dryer-system-v2 - only slightly higher with wider feet, so that even larger bottles (including…
This model is free. If you appreciate this model, please leave a download and a like! Summary: 3D scan of the world’s smallest penguin, little blue penguin, property of the Auckland Museum Collection. Edited to be printed on a single…
CArts Little Acro EDF-Version Span: approx. 1200 mm Body length: approx. 720 mm Take-off weight (LW-PLA): approx. 600-650 g Drive: EDF 50mm diameter Propeller : folding propeller Battery: 3S Lipo 1000 mAh Controls: elevator / rudder /…
A slide-to-drop scoop designed for easy and mess-free transfer of powders into bottles, shakers, thermoses, or containers. The scoop features a sliding bottom: simply collect the powder, place the scoop onto the bottle opening, and slide…
A cute little mushroom that prints in two pieces so you can have tops of different colors! Print at 50% size for best results.
If you like my work and would like to see more, please consider buying me a coffee I needed a bottle for wood glue and I needed something cost effective. buying bottles specifically for decanting wood glue, wrecking the bottle with glue…
I grow tomato plants indoors during the winter, and use these adapters to help water the plants slowly via a 2-liter soda bottle filled with water. This set includes single, double, triple, quad, and six-outlet versions. Works best with…
Star Wars Rebels Little Green Army Men/Women Set. Yoda Added (1/22/2026) single figure not saved on plate or part of gcode. (Print Separate) You can find the Empire Set Below in MyClub I have uploaded all the individual pieces as .obj…
This model is based on the orginial walls of the German 3rd Edition of the expansion Cities and Knights for the game Catan . Its purpose is to protect a city against the robber. Every player can have up to three cities protected with city…
Small stars twinkle in the sky, as they do each day every day. So inspired by that we created a new pot design! Merry Christmas and Happy Holidays! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
Want to attach your bottle to your backpack? This is for you! Fast and easy connection with a snap :)
Printing and adding to your used PET bottle and watering your plants is easy. Update 3/19/2022: Added file with brim for those having bed adhesion issues. Update 3/22/2022: I added a file with a brim and spike with only one hole.
This is a remix of my own mashup remix Fidget Octopus Ring. The headless spinning octopus ring now has a head!! I got a request on my original headless model to make it with the octopus head, but I wasn't sure if they were requesting the…
Layer Height: 0.15mm Nozzle: 0.4mm Materials used: PETG / PLA Supports needed Yes / recommended Infill: 15% Print times: Total: 3h32m / 2h22m white / 1h6m blue / 4m black Need help? Find me on Discord: https://discord.gg/qanRKqz8xA
[EN] Sometimes it happens that a visitor comes with children who are bored and need some entertainment. In this case, simple and easy to print toys come in handy, where the child will have fun both watching them print and playing…
Simple cat toy ball with rattle. The rattles were printed in different colors than the balls and dropped in during a pause when printing the ball. I found producing good results with minimal warping on the lower half of the ball requires…
Seeing the unexpected acceptance of the shark kit card ( https://www.printables.com/es/model/526340-happy-shark-and-angry-shark-kit-card-updated ) , I leave you this new model that is certainly the one that inspired the kit card. It's a…
...not really a "source file" remix but a reinterpretation of the basic design done from scratch in FreeCAD with some refined edge chamfers - parametric *.FCStd file is included Dimensions are fitted to the much more chunky SodaStream…
Model of a small dragon bust in multiple colors. No MKS and no filament change required. Simple and quick print, just print everything, snap it together, and you're done. Printed on Prusa MK4 and Bambu A1 Mini. PLA Support: yes, organic /…
Revision Notes 8/23/2026 - I added a Small-to-Large connector cap after a few people requested it. There are three kinds of connector in this set. I have found the smaller connector fits many types of hand soap, dish soap and lotion. The…
This model was tested with Estes C6-5 and A8-3 engines, both worked well. This model is entirely 3D printed and support free, however, a brim is highly recommended. Unfortunately, it is too tall to fit on the Prusa MINI. Watch the test…
This is a simple water bottle holder that you can print for your bike, with the added bonus of allowing you to discreetly hide an Airtag within it! Design Specs: This was created specifically for a Cannondale Quick 5 bike (that has 5mm…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Brim (Recommended) Supports needed Scale it as you like :)
When washing your sodastream glass bottles, leave them to dry in this holder, which fits both the bottle and the lid. Furthermore it features a removeable dripping tray. Print instructions Models These models can all be printed in any…
My kids are huge fans of BattleBots and inspired me to create a set of toys that they can be a bit rough with without fear of breaking the more expensive Hexbug toys. All “pins” are sections of 1.75 standard filament snipped to length.…
A SodaStream Bottle Cap with a nice design and handle. 0,20mm Resolution, Support on the built plate only, infill 20%. PLA. Used Creality Ender 3 Pro.
Info: for 3 bottles/cans upper position is not that high, so it can fit also lower celing drawer (and use just 2 bottles) stackable side by side 3 variants (see below) the upper position can hold even larger bottle if you have generally…
The model consists of car body, small wheels, large wheels, small off-road wheels, large off-road wheels, robust screws as semi-axles, car key serving as a socket wrench and smaller wrench with handle. It is fun for kids to change the…
Note - This is not a MMU print. Simply print the parts in the appropriate colours and glue them together. Little Cities is a 3D Printable toy series where miniature buildings and vehicles are stored within a purpose designed case until…
The model consists of car body, small wheels, large wheels, small off-road wheels, large off-road wheels, robust screws as semi-axles, car key serving as a socket wrench and smaller wrench with handle. It is fun for kids to change the…
Printing I use 4 parameters to make the threads solid. Seams I chose to place randomly, to not make it weaker in one spot and to keep negative aesthetic impact low. I used snug supports to keep the cavity for the seal clean; it's easy to…
Small container storage that fits a standard PET bottle cap. 3 variants: small small with gridfinity base medium height Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Filament: various PLA…
The bottle cage is suitable for 0,5 liter PET bottles which you could buy in a supermarket. Due to low stiffness of PET bottles, the bottle cage is designed to work without clamping of the bottle. Other bottles with a bigger diameter fit…
