Counting matching models…
This is a bottle cap with a watering nozzle. The cap should fit any regular PET plastic bottle. The nozzle is angled by 60° to make it easier to use. Printing instructions: Use a printing sheet with a smooth surface (to avoid leaking).…
Create your own battle droid army and take over the galaxy! If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee (PayPal). Thanks!…
Stackable Bottle Drying Rack This simple and practical bottle drying rack features a sturdy square design for stability and efficient drying. Its stackable design saves space and allows for easy expansion when needed. The hollow structure…
Another one-handed bottle opener? Yes, but wait, there's more to it! Update June 2023 I got several reports from people that their print broke. Also not every slicer has the hexagon infill. This was bothering and I was searching for a way…
This is a brass brush nozzle scrubber with a bucket for Voron 2.4. It has 2 parts which connect together with standard 6x3 Voron magnets. Printed without support. Designed to fit 300mm Voron 2.4 but could be used in 250mm or 350mm Voron…
Support Me Support my work by subscribing to my Printable club to have access to my new model, my first lander, the Starship V2 . You can also have access to the multi-material version of the Space Shuttle. Updates 22/11/2023 Added a…
Something quick, because of course I had to make an entry for the jointed figures competition! This snap-fit model starts as a one-inch cube and flips inside out to reveal a cute, spiderlike robot. Instructions The 3MF file has all the…
Finally, here you see the new Little Grass Drake Articulated, Print in Place, Printable without Supports needed. I printed this model with 100% / 70% / 50% size and it worked fine. I also created a File with separated Eyes. So have fun…
Update(8/6/23) : Added a low-interference version for anyone having problems with collisions with their toolhead cover. This one is harder to print, but it should solve the issue for people where they get rubbing with the support arm.…
Update 1 - 17th October 2023: Thanks for the feedback and the great prints everybody! :) As expected some printers have troubles with connecting two stacks together, especially when they are not calibrated enough. I added a small chamber…
Bring some rattling fun to your desk, shelf, or backpack with the Jolly Skeleton ! Designed in a simplified, cartoonish style, this adorable skeleton features a big round head, plump little hands, and boot-like feet. The head and jaw are…
Introduction Wasn't happy with the selection of water spikes out there so decided to create my own to fit whatever needs you may have! And while you're at it why not have it double as a plant label! This spike can be printed in as little…
You can use the PET Bottle Cutter to cut sprips from the PET bottles with selected width. The width is defined by spacers which are put under the blade. The PET strip can be then used in machine which converts it to filament for 3D…
This is my model of the Space shuttle Endeavour OV-105. The model is a kit and does not require any glue. It is roughly 50cm long and has several features. The cargo bay doors can be open. It has posable arm and the satellite could have…
Rescaled battle droid that prints in parts and fits together as it does in its original LEGO form. This .stl is 400% of the original size. Can be scaled to any size ! This size is perfect as a single pen holder ✒🖋🖊🖌🖍 I printed these parts…
Octopus Wine Bottle Holder 1 Color AMS, MMU or, ACE Pro PLA Basic Purple Bambu Labs .3mf Included Commercial License Available For commercial use: https://www.patreon.com/c/atro3dprints/membership Special Thanks to PCBWay! This project is…
Create your battle droid army and take over the galaxy! If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee. Thanks! Check out my…
It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…
This Young little cattle leans his head to one side Please make sure that you putt some supports under the belly and maybe on the front seeing left horn.
check out the other versions Here we have an easy to print and easy to store Bottle Dryer System you can choose from 3 diffrent types of dryer (the Straight Version is better for small mouth bottles and cups) 2 diffrent Holder a version…
The print requires no supports and consists of only two parts. Simply snap the hook into the wasp trap. Pour water mixed with sugar and a bit of vinegar into the PET bottle. Then screw on the printed part and place the bottle on a table…
We all know the ships in a bottle, but how do you put a (hard) printed message or even a 3D model inside a glass bottle? It can (almost always) be removed similar to the way it came in. Manual how to do this yourself is shared under […
Create your own PET filament from plástic bottles! You can find all the information, blueprints, instructions, and much more on my website: https://sites.google.com/view/ecodecat3d/home KIT For a much easier assembly, you can purchase the…
Another accessory to organize fridge and not only fridge storage. This fridge bottle holder designed with durability and minimum plastic usage in mind. There are 2 models - 2 or 3 bottles. Maximum bottle diameter: 90mm Height of the rack:…
- IF YOU JUST BOUGHT a PARTS KIT from KB-3D.com → please go to the following download page for the MK6 : Fun Size KB-3D Build Kit : https://www.printables.com/model/1246713-the-recreator-3d-mk6-fun-size-a-kb-3dcom-build-kit If you are…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) NEW UPDATE: TWO TEALIGHT…
Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…
Two versions for long or short screws, the hole for the rod is 6mm. 5 top and bottom, 3 walls, 30% gyroid, no supports.
It's a pastry cutter. It's very simple. Height is 5.2 cm, width 6.2 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
As an example what is possible to print with our Colorprint we designed Prusa Bottle Opener :D. The print is supposed to take approx. 30 minutes and the printer will ask for filament change with beeping after 25 minutes. Don’t forget to…
The source marked this model as adult content.
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
Keep your cleaning supplies organized with this practical spray bottle holder. Perfect for storage rooms, cleaning cabinets, garden sheds, or workshops. Designed for easy wall mounting using two M6 screws, this holder secures most…
More of my Star Wars kit cards are available at: Millennium Falcon Kit Card Tie Interceptor Kit Card Landspeeder Kit Card Also check out the awesome Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 This was made to fit when…
Made to fit snuggly so that it doesn't wobble. I also added some foam tape on the outside for even better fit. Confirmed fits 2015 Camry and 2019 Kia Sorento but should fit most 3.2 inch car cup holder. Probably should use filament with…
Kitten Figurine Read.me! Fast and lightweight print. Use supports - very easy to remove. Printed with Fuzzy Skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 If you're interested in the commercial…
Bottle Marker/Cap for Drinks & Beer Youtube Short Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original…
Print Settings: No supports needed (as long as your printer can handle bridges fine.) Layer height : 0.32mm (you could go lower, but thicker layers will make it stronger) Walls : minimum 3-5 Infill : doesn't matter; anything >10% should…
Army Painter Speed Paint is a fantastic paint range that can save bundles of time in miniature painting. Their labels, though, do a poor job of truly showing what the paint will look like on the model. These toppers can be painted and…
A kettlebell inspired keychain. Prints pretty good without supports. Hot tip: Pause the print while the handle is printing and put the keyring in place. Originally published in 2019: https://www.thingiverse.com/thing:3989772 Category:…
check out the other versions The bottom of this version is flatter and straighter, making it easier to place bottles, mugs, cups, etc... on it we have 4 versions Version 1 simple it works but for me it is a bit too shaky Version 2 more…
FOR COMMERCIAL USE: Check here Introducing the Bum Buddy - your ultimate travel companion for a refreshing clean! Simply screw it onto any standard PET bottle like a bottle cap to get yourself a portable bidet in seconds! With its…
Modeled in Blender for nice vase mode prints. The Nuka logo is nicely smoothed so perfect for single perimeter prints.
Welcome to my first attempt at a printable kit of the Battleship Fuso in 1:625 and 1:700 scale. This model is based on the Fuso model in the game World of Warships, completely remodeled from the ground up, with many tweaks and adjustments…
We’re kicking off this year’s Halloween season with a cute little ghost. The model is simple to print, requires no supports, and is compatible with an LED tealight or a small light source that can easily be placed inside. The model has…
This device can cut plastic bottles into strips of 7 and 11mm for 3D filament.
Check out the full build video here explaining assembly in detail: This case uses less than 700 grams of filament in total and requires a print surface of 230x230mm or bigger. ** A front panel version without the logo is also added in…
Print: I printed with PETG with 0.3mm and variable layer height (because of thread). A brim is recommended. Food safety: at own risk. Depending filament and print. Please let me know your experience. 2024.5.06: version without air…
This is a two handed battle axe for Dummy 13. It is about 80x30mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my…
A simple self-refilling water bowl for cats using a PET bottle. A 2-liter bottle would be ideal. Printed with Esun PLA+ with a 0.6mm nozzle, 2 walls, 4, top/bottom layers, 30% infill, NO supports. 2- liter bottle model is for reference…
Now This is FUN! Guaranteed hilarious fun in any situation when you brought this with you as a gift or just for the fun Now This is FUN! Guaranteed hilarious fun in any situation when you brought this with you as a gift or just for the…
This is just a simple and very small bottle cap container, i.e. you use ordinary bottle caps as lid. It adds only 5mm height to most bottle caps. At least for all the caps I tried, the cap closed nicely and tightly. EDIT: There are 2…
UPDATE 25/04/2024: Added a second version with wide stream - useful for covering bigger area This is yet another adapter cap that screws onto any regular PET bottle (that has PCO28 thread) so that it can be used as a watering spout -…
A practical 3-piece funnel set designed to screw directly onto standard PET bottles. 🔄 Each funnel connects using a built-in bottle thread — no slipping or holding required 📏 Available in three sizes: 77 mm , 112 mm , 147 mm 🧴 Ideal for…
3D scan of skull found on the Battle of Visby, where on 27th of July 1361 the Danes fought Gutnic Peasants. The human skull found at the Battle of Visby is a grim reminder of the brutality of medieval warfare. The skull shows clear…
I reworked my office recently and added a couple IKEA Skadis pegboards. I've been using and loving CSD_Salzburg's Skadis set and decided to make some more custom pieces for specific needs I have. One of which is to hold my mini paints in…
Update: Just uploaded “V3” Versions (slightly better looking, slightly better function) Backstory I was unsatisfied with most of the printable bottle cages because they usually only fit one specific bottle/can size and do not “grip”…
(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…
Hello everyone, here are the print instructions: 0,3mm 5 perimeters (for additional strength) 100% Infill PLA or PETG (PLA is strong enough to open countless bottles) No supports needed Happy Printing and Na zdraví!
Toy Heart Waffle Iron – Fun for Little Kitchen Chefs! Bring real kitchen vibes into the playroom – no electricity needed, just lots of imagination! This lovingly designed 3D-printed toy waffle iron comes with matching heart-shaped waffles…
Use a brim for adhesion. The full bottle is a 2-3 hour print at 0.2mm layer height . Should also scale well within your slicer if you want a different size. You could try printing the half-bottle face down rather than standing up although…
If you download the model, please don't forget to leave a like. Thank you! <3 This 3D print file captures the awe-inspiring moment of a space shuttle breaking through billowing clouds, ascending into the boundless expanse of space. This…
Meet Eki, your pint-sized guardian of calm and coziness. With wide curious eyes and a round feathery body, Eki brings quiet charm to any space. This owl’s tiny size and quick print time make it the perfect addition to your flock of kawaii…
A generic lid/cap for bottles and jars. Can be configured to fit most containers. Allows for containers with multiple interleaved threads. NOTE : I've published an updated version of this called Parametric Screw-Top Lid .
Drink holder that clamps to tables. The holder has a large diameter to accommodate a large range of cups and bottles. After printing, simply slide the cup holder into the table clamp from the side. There are two parts at the back of the…
from https://www.thingiverse.com/thing:5649133
Booenchy, the Halloween Ghost Benchy. You can even put this costume over your Benchy and transform into a hilarious and haunting specter. With draped cloth and perfectly placed eye holes, Booenchy captures the timeless charm of a classic…
The bottle opener assists people with arthritis, limited finger dexterity or other disabilities to open standard water bottle caps (⌀ 30 mm or 1.18 in). The device provides a large gripping surface and clamps onto the caps of standard…
All Things STL wine bottle holder: Does require 2 small tree supports. There are two different models one for 200x200 plates and one for 220x220 plates. If you have a Prusa (or this size printer) print the 200x200 If you have a larger…
Bottle Opener for Screw & Crown Caps. Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original models on MW…
This is a bottle spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for standard european bottles (PET and glass). The spout is fastened with a knurled…
A little rack for holding spray bottles in the garage. It's held to the wall with #8 screws. I printed it in PETG with no supports.
Space efficient Skadis paint bottle holders that create honeycomb layout on the wall and perfectly tessellate. They are made for four groups of paint bottles: Paint dropper bottles as produced by Vallejo, Army Painter, AK, Reaper, etc.…
Hast du Probleme eine PET-Flasche zu öffnen oder kennst jemanden, der dringend Hilfe benötigt? Dann bist du hier genau richtig. Dieser Flaschenöffner ist ideal für ältere Menschen, Menschen mit Gicht oder Rheuma, also Menschen, die nicht…
There's a model for a 48mm thread (usually from European 5-6l bottles) and for a 28mm thread (ex. Coca Cola bottle). Using a 48mm thread is recommended because the seeds don't get stuck Poke a small hole in the center at the bottom of the…
A tiny guardian full of charm and mystery! This chibi-style owl captures the iconic look of this nocturnal creature with soft shapes, detailed feathers, and a compact design perfect for display. Carefully designed to keep a balance…
check out the other versions it's bigger it's more stable and it's expandable here the latest version of the bottle dryer in different versions this version is taller and wider than previous versions i added a dovetail connector system so…
A Cute Little Pumpkin Spider For Halloween Decor
For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…
This Bottle Cage is designed for 3D printing from ASA material, which is UV light stable, and then it is the best material for outdoor use. While printing, we recommended using the skirt in full high of the 3D model. The inner diameter…
Its a complete battle ship game, which can be broken down into pieces for printing and storage. Whole thing fits into a large stone wheat thins box. Lots of very small pieces so not good for small children. Print instructions You would…
Battle Axe is a 3d printed Nerf shotgun blaster that fires and ejects Silly Shells! Spring powered, pump action prime. Yes, it actually fires multiple darts at once! Changelog is at the bottom of the description text. Most recent update:…
A modular hydroponic tower with hexagonal base. This is a smaller hydroponic tower (dimensions: 36cm x 40cm x 64.5cm). All parts should fit even on the smaller bed sizes. The model consists of segments that can be connected to build a…
Description Introducing the Ultimate 3D Printable Fishing Popper ! Get ready to elevate your fishing game with the “Perfect Popper” design, the perfect blend of innovation, functionality, and ease of assembly. Designed specifically for…
A small dog as a decoration for the garden Height: ca. 12cm (Scan with Einstar)
This cat toy is unique and puzzling to comprehend at first glance, but prints all at once with no supports. The ball inside rattles around but cannot be removed from the D20 (trust me, I've torture tested it with my cats). It also makes a…
I designed this universal bottle cap opener with a lever-based mechanism for easy opening of water bottle caps ranging from 27-35 mm in diameter . Use 3 perimeters + 30% infill. 🔹 Features: ✅ Ergonomic Lever Design: Uses a simple…
I saw this type of wine stand a few days ago but could only find it made of wood, so I decided to design my own. I printed several until I found one that fit most of the bottles I had, printed quickly, and was sturdy. I incorporated a…
This is a booster pack for the Space Shuttle Edeavour . It consists of the Orange external tank and two Solid Rocket Boosters. The pack is attached to the Orbiter using the holes for a stand. In the suffix of the files, there are color…
Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…
Settlers of Catan replacement parts(city, settlement and bridge) I create this things during the last jear. The models are close to the original parts. Print instructions print settings: LH: 0.1mm Nozzle: 0.3mm
For little makers. Need some magnets and glue. Second thx soap warrior! Category: Toys & Games
Just change the scale to print the size you need. Photos of dual color prints, one using a glow in the dark PLA filament. Please note that printing this model will require supports. COMMERCIAL LICENSE AVAILABLE: https://patreon.com/3DPA…
I don't have much storage space at my place and always hated how bulky traditional beer trays were, so when I got bored and thirsty at the same time the other day, I designed this compact minimalist version. It holds the bottles by…
Bottle holder for plastic bottles with 75mm diameter. Inspired by Nalgene 32oz Water Bottle Bike Holder by Dutch Goldblum Print instructions Category: Sport & Outdoors Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No…
V2 note : I made a version 2 to be able to print the tail without support. I haven't printed this version yet.
No brim or supports required. A reusable wasp trap attachment designed to screw directly onto a standard bottle like a regular bottle cap. The trap works by attracting wasps into the bottle using sweet bait such as juice, soda, syrup…
