Case for AZDelivery serial (USB to TTL) adapter FT232RL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A OpenSCAD case for AZDelivery FT232RL adapter, to fully enclose the adapter, with "pad" to ZIP-tie the jumper cables.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
A OpenSCAD case for AZDelivery FT232RL adapter, to fully enclose the adapter, with "pad" to ZIP-tie the jumper cables.
Originally the ZIP-tie pad was flat, but it was way too easy to break it off. Then I changed to this triangular-ish shape for strength.
The LED's on the adapter are not visible when in the case (not a problem for me), and the jumper is not accessible.
Print instructions
I recommend to print with at least 3 perimeter walls for strength, 4 would be even better.
Print with the USB-connector opening facing down.
No supports are needed.
I printed with 0.2mm layer height, but 0.3mm should be perfectly fine too.