Case for AZDelivery serial (USB to TTL) adapter FT232RL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A OpenSCAD case for AZDelivery FT232RL adapter, to fully enclose the adapter, with "pad" to ZIP-tie the jumper cables.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
A OpenSCAD case for AZDelivery FT232RL adapter, to fully enclose the adapter, with "pad" to ZIP-tie the jumper cables.
Originally the ZIP-tie pad was flat, but it was way too easy to break it off. Then I changed to this triangular-ish shape for strength.
The LED's on the adapter are not visible when in the case (not a problem for me), and the jumper is not accessible.
Print instructions
I recommend to print with at least 3 perimeter walls for strength, 4 would be even better.
Print with the USB-connector opening facing down.
No supports are needed.
I printed with 0.2mm layer height, but 0.3mm should be perfectly fine too.