PROTON-M
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print your detailed 1:200 scale PROTON-M . Easy to print and assemble.
- Rating
- 5 / 5
- Likes
- 68
- Downloads
- 209
- Makes
- 7
- Views
- 1,212
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Standard Digital File License
Updates
06/09/2025
Small correction to the 3MF files concerning the silver parts.
07/11/2025
Increased size of holes in the “Stand_black” for better engine support.
Release date Free.
This model will not be available free until 01/01/2026
Multicolor
The multicolor version is only available to members of my club.
Description
The Proton-M model is a highly detailed 1:200 scale reproduction of the historic Russian rocket, launched for the first time in 2001 for 115 launches, 104 of which were successful. The model consists of several pieces printed separately, which are easy to print and assemble.
The finished model dimensions are approximately 30 cm high and 5 cm wide.
Printing
There are 32 parts to print, the total printing time for the entire model is approximately 5 hours.
Choosing your configuration kit.
There are multiple configuration kits available for this model, depending on your printing and assembly preferences.
Project 3MF
Multiplate files ready to print.
Dossier .Zip
Second Stage with Flag (Full Rocket with flag in the second stage)
Second Stage without Flag (Full Rocket without flag in the second stage)
Stand MultiParts (Nameplate with all letters separated)
Stand MultiColor (Nameplate all in one)
Print Guide
As the proton-M is a small model, I recommend printing it at 0.16, but the model also prints well at 0.2.
Nameplate AMS, The nameplate can be printed with a multicolor system, but also with a color(M600) change at layer 14.
Tips
Settings
For infill, 15% is sufficient for a decorative object, and you can also use "Lightning" infill settings. .
For the base, it is recommended to print with 3 perimeters to avoid visible infill.
If some parts are loose or don't fit, you can change the scale by +/- 1% in the slicer to get a better fit.
Printing
For a better final result, I recommend printing the Jonction_Block last so that you can adjust their size according to your print and have a better fit during assembly.
Post Printing
You may need to sand the junction areas between the parts for a smoother finish.
I recommend using glue for better strength and durability.