1 / 1
Concentrator clamp, v3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clamp to enforce the handle of oxygen concentrator, narrow version with hinge
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is an experimental device. Use with caution on your own risk.
Manufacturing instructions:
- Material: PETG
- 3D Printer: FDM 3D printer, average print time 1,5 hours (for set 2 clamps)
- Slicer settings: 0.2mm layer height, 4 perimeters.
- Post processing instructions:
- Connect the top and bottom parts with the M6x30 bolt and nylon M6 nylon locking nut
- Use M6x30 bolt and M6 nylon locking nut to attach the clamp to reinforce the handle.