79 models
A replica of the MBU-14 (V) 1/P Oxygen Mask issued to all Naval aircrew members in fighters like the F-14 Tomcat, F/A-18 Hornet, A-6 Intruder, and other aircraft EA-6A, KA-60 (refueler), A-4 Skyhawk, and T-28s. Although not 100% accurate,…
Several designs of a shut-off valve for medicinal oxygen tanks or any tank with a similar mechanism. You can leave them attached to the tank for a semi-permanent shutoff mechanism.
This model is compatible with the lego system.
1/10th scale accessory. these are 80lb and 75lb midsize tanks The wheel is for the cart, Cart is being made out of metal so there is no stl for that. standard phone wire has red and green wires that will be great for the hoses I think.…
A simple and durable oxygen key/wrench for M2, M4, M6, M7, M9, M15, M22, M24, MD, ME, A, B, C, D, E oxygen tanks with 'post' type connectors
mamiya press lens for Oxygen Camera
This is a model of a 4.2" medical oxygen cylinder. It can scale from from “ML-6” to “E” by varying the number of wall segments or scaling them. Paint the top dome green and the rest of the tank silver. Use the friction-fit connector rings…
This is just a variation of my " Dust Cap for DIN Scuba Regulators ", but for regulators with a M26x2 thread for use with gasses with an oxygen content above 21% within the EU. Read this before you print or use it: I do not own such a…
Needed some words on it to be compliant at work.
F-14 Tomcat Oxygen & Vent Airflow Panel
3d printable oxygen tanks for use in the Deep Rock Galactic board game, specifically the Space Rig Expansion. ROCK AND STONE
A wrench for use with medical oxygen tank valves. Three different openings for tank valve engagement. A high wall count is recommended to improve longevity. Fusion 360 source & .STEP files are included
This model represents an oxygen pressure cylinder designed specifically for use in medical simulation environments. It allows users to connect an oxygen delivery tube and set the oxygen flow rate by adjusting and reading numeric values on…
This rack is designed to store multiple 5L O2 tank in a standing position. The main purpose is to avoid accidental hit and spill the tank.
This clip will hold a oxygen hose next to a ResMed APAP/CPAP hose used with a oxygen bleed in. Clip is 3 mmm thick and the hose for the oxygen is 6.5mm the CPAP hose is 18.5mm
This is an experimental device. Use with caution on your own risk. Check orientation of the knob's direction (+/-) before printing. Material: PETG 3D Printer: FDM 3D printer, average print time 30 minutes. Slicer settings: 0.2mm layer…
I just modified the Gas Cylinder Valve Indicator from Luma, here on printables to fit my cutting torch oxygen tank. This tank has the type of valve knob with 8 ears. Picture of the valve attached. Check my other models for Acetylene cap.
Oxygen Humidifier Bottle Adapter 40% infill for best results.
Oxygen Humidifier Bottle Adapter 90 deg. 40% infill for best results.
Designed to hold this: https://www.amazon.com/JIAWANSHUN-0-1-1-5LPM-Flowmeter-Connector-Conectrator/dp/B01N0UWZ2T/ref=sr_1_3?crid=3GRLCMB1WWZYK&keywords=oxygen+air+flow+meter&qid=1655784141&sprefix=oxygen+air+flow+meter%2Caps%2C116&sr=8-3…
I have an elderly friend who has to use an oxygen concentrator. Lately, he has been having an issue where the oxygen hose is bending and kinking at the end of the hose connector which was severely restricting his ability to breath. I…
Mounts are positioned for printing, no supports needed. Examples in pictures are printed using PLA Plus at .28mm layer height and 15% infill. I used 3 mounts total to hold the keyboard. They are designed to fit into the open space on the…
Simple slip-on protection to prevent the hose from kinking in the carrier bag. Fits hoses with a diameter of up to 6mm. The upper part broke off, but still fulfils its function. I would recommand to tilt the part and print with support in…
The current contest is called "Organization Tools" While this is meant as parts for storing stuff, I would like to submit a "Tool used in my organization". Boeing aircraft with Sky Interior (BSI) have a new layout for passenger oxygen…
You can print this model on most printers without support. It is there to help connecting different oxygen-connectors in healthcare use cases. However, it is important to say that it isn't an medical certified device, and I highly…
If you have a threaded cannula, this model will allow you to press fit into it and then secure it from having it be pulled out. Print with PETG or PLA 30% infill. 0.2mm layer height.
Remixed from Quick Clip remix files on shapr. To be used with QUICK-CLIP (GEN 3): Base Starter Kit by Taylor.
Oxygen Tank Mount for Waterloo Medical Crash Carts, Model OTB-4 Example of this specific part here. The OTB-4 oxygen tank mounts for crash carts frequently break. Given that Waterloo Healthcare supplies over 5,230 hospitals with over…
This clip will hold an oxygen hose together with a CPAP hose to make movement easier with the oxygen hose inside an electrical wire wrap. https://www.harborfreight.com/1-4-quarter-inch-x-14-ft-protective-wire-wrap-66985.html Wire wrap…
Standard PLA, Resin printing would likely be best. My 0.2mm nozzle couldn't print the finer details, so I ended up clipping the top half which is shown in the picture.
To put the collar on the tube, all you need to do is slide one of the open edges onto the tube, and make sure that the kink is completely covered.
This is an experimental device. Use with caution on your own risk. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 15 hours. Slicer settings: 0.3mm layer height, 4 perimeters, 30% infill (or…
replacement seal for an oxygen tank yoke I suggest printing out of tpu with 100% infill
I designed these oxygen and temperature token for the Terraforming Mars: Ares expedition board game. Printing these things with a raft/brim is to be advised.. my printer had way easier printing it when that was activated. The temperature…
My very first model. Was made to hold extension tubing for an oxygen concentrator but can be used for any cords or tubes. Designed to be used with command hooks but feel free to edit it to have screw holes. made with Tinkercad -…
My own creation inspired by this Anti-Kink Adapter for 6mm Medical Oxygen Concentrator Hose by Iconman - Thingiverse . The original item fit tightly on the 66mm tube and caused the occasional kink at thee end of the kink preventer. I…
Oxygen humidifier connection It has a 9/16' x 18 threaded connector print made on an Ender 6 - Creality 0.2mm layers 15% zig-zag fill made in ABS the software used was NX-Siemens
This is a basic oxygen carrier I made for my grandma who could not afford to buy one since insurance didn't cover it. It may wobble a bit if put on an uneven surface, so there are optional side supports you can glue on to make it easier…
This is an experimental device. Use with caution on your own risk Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 4 hours. Slicer settings: 0.2mm layer height, 4 perimeters, no supports Post…
voici plusieurs modèles pour éviter le principal problème des tuyaux d'oxygène qui est la pliure de ces derniers compliquant grandement la circulation de l'oxygène. Modèle A > avec un petit rebord permet de faciliter le retrait du tuyau…
I wanted an oxygen wrench slim enough to fit in an empty shears pocket on my uniform pants, and long enough to leave a decent bit of the handle poking out to grab. None of the others I saw did both, and this also served as a good way to…
I am using an oxygen concentrator at night to manage my sleep apnea. Since these devices are very loud and disruptive to sleep, I've moved it to an adjacent room. This hose connector is used to connect a 7-meter-long oxygen extension tube…
This is an experimental device. Use with caution on your own risk. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 3 hours. Slicer settings: 0.3mm layer height, 6 perimeters, 60% infill (or more),…
Someone reached out to me about getting a 3d printed oxygen tank knob. Oxygen tank knobs usually cost around $20 on ebay and amazon and they are usually 3d printed. I looked around and there weren't any print files available so I decided…
This is a case to build your own passive oxygen analyser with sensor cells retired from your rebreather. Considering the low resolution of the analogue readout this is obviously not suited for analysing gas mixes that you plan to use for…
Created a tool to remove and install the outlet barbed fitting on a Inogen One G3 oxygen concentrator. The fitting gets removed or installed by slotting the tool over the fitting and turning. Make sure to print the model with the opening…
Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…
Herein are a valve wrench with a coil lanyard and attachment clip as well as a clip-on tank status indicator. All can be printed in PLA without support, but the wrench requires at least 4 perimeters and 40% in-fill (more of both the…
This attachments prevents maintenance sheet to cover important functional parts of oxygen concentrator. Manufacturing procedure: Material: PETG 3D Printer: FDM 3D printer, average print time 2 hours (with Input Shaper on MK4) Slicer…
This is an experimental device. Use with caution on your own risk. The design has been made for the humidifier bottle with the diameter of 48mm. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 2.5…
a new base for a oxygen filter for a small aquarium / fishtank
See also https://damiensiviero.com/carbon-monoxide-oxygen-analyser/
Made this to clip on to oxygen tanks. Attached just with a string and carabiner for quick removal and installation.
It has a flat side to put it on the bed. It doesn't need support and we recommend use mouse ears to prenvent that the piece separate to the build plate. To get a good quality, use a little layer height. Also we share the STEP file if you…
Recommendable make it with resin 3D printing because the piece is small and you can get a good definition, quality and correct dimensions with resin The resin is not good for the health, use the material is your resposability In this case…
This is a part to mount a flow meter that's often used to get the right amount of oxygen into the wort when making beer! Oxygen bottle is 71mm in diameter and the mounting hole is 10mm. For scandinavian brewers the bottle and regulator is…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
A vital piece of scenery for any realistic environment, this 3D-printable model features a standard high-pressure oxygen cylinder paired with a heavy-duty transport dolly. The design follows the classic industrial silhouette: a tall,…
First, disclaimers. This is not for human use whatsoever. I am not affiliated with Boost or any other brand of canned oxygen. Pure oxygen is potentially very dangerous. This design is obviously not how any manufacturer intended their…
🧯 Training Oxygen Cylinder Replica with Functional Pressure Regulator Professional Training Aid for Traffic Accident (RTA) Rescue Simulations This training kit is specially designed for fire and rescue services to practice extrication,…
slips on to a standard Boost oxygen bottle. keeps it handy when you need a quick "boost" For medium and small bottles with and without a leash. Designed to fit on a carabiner or strap
Подставка под кислородный баллон. Крепится к полу при помощи двух саморезов с пресс-шайбой. Так как в нижних отсеках шкафов машин скорой помощи нередко есть "ступенька", модель выполнена в двух вариантах - для ровного пола и для…
A duct for the Electrolux Oxygen Air (Z9124), that re-direct air the air horizontally. Print with the flat sides facing down on the bed. Use super glue (CA) to join the parts. It works fine for me, though for speed 3 and 4 (max), I need…
I made these pieces as part of a project to help students learn about the importance of phosphorus, so this is a rather specific combination of elements. They can be fit together in 2-D versions of the various tetrahedral shapes that you…
Part of the Customizable 3D Printable Periodic Table - 6 element tiles for column 16: OXYGEN (O), SULFUR (S), SELENIUM (Se), TELLURIUM (Te), POLONIUM (Po), LIVERMORIUM (Lv). Each 40 mm tile carries the atomic number, element symbol, name…
This is an oxygen bottle clamp that mounts to the back of a medical chair using the tow hitch using 1/2" square tubing.
💥Все наши контакты на одной странице: https://hipolink.me/prosmp Канал на YouTube: https://www.youtube.com/@prosmp Канал "Про СМП" в Rutube: https://rutube.ru/channel/23667661/ Наш канал в Telegram: https://t.me/prosmp Группа Вконтакте:…
This is functional plug to use in place of the one coming from lambda/oxygen sensor wires on a SWM Superdual X motorcycle. Most likely many other motorcycles are using such 4-pin connectors, AI identified it as "Sumitomo 090 Series 4-Pin…
Recommendable make it with resin 3D printing because the piece is small and you can get a good definition, quality and correct dimensions with resin The resin is not good for the health, use the material is your resposability In this case…
A vital piece of scenery for any realistic environment, this 3D-printable model features a standard high-pressure oxygen cylinder paired with a heavy-duty transport dolly. The design follows the classic industrial silhouette: a tall,…
This model represents an oxygen pressure cylinder designed specifically for use in medical simulation environments. It allows users to connect an oxygen delivery tube and set the oxygen flow rate by adjusting and reading numeric values on…
This is a wrench to turn on and off medical oxygen cylinders. The other end is a 17mm line wrench to tighten or loosen the nut for the high flow hose for a ventilator or BiPap.
I love the Oxygenics Fury shower head in my camper, but the mount is known to fail and crack (why they would design it from cheap plastic is beyond me). So I designed this piece that fits over the mount, and it both reinforces the sides,…
Customized version of http://www.thingiverse.com/thing:114247 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=114247 Instructions Using the following options: pin_cap_width = 4 ring_height_step = .5…
This is a replacement mounting post for the Original E-Z Breathe from MH Oxygen. Please, note this is not for the updated E-Z Breathe-II version. The ball is 5/8" with a 3/4" base. This is used to mount the boom cannula onto a headset…
