1 / 4
Dual Z mod for Kobra 2 Neo V2 — image 1
1 / 4

Dual Z mod for Kobra 2 Neo V2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

dual Z with adjustment

Rating
0 / 5
Likes
11
Downloads
31
Makes
0
Views
366
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

V2 

{Made of sunlu petg material, the shrinkage is designed for it. Each part has an adjustment for better alignment of the belt and the shaft.

The side panels are printed in mirror and feature 4 short screws M3, measuring up to 7 mm in length, and 1 screw measuring 13.5-14 mm, along with 2 small washers. The bearing is 628ZZ, the size is 8x24x8mm. 2 M5 long screws for top fastening.  X2 

Middle, First, print out the test and check if the holes align. You will need 2 short M4 screws for the upper mounting, 4 long M4 screws measuring up to 40 mm, 2 M4 nuts for the carriage, 1 long screw (+/- 35 mm for the 6 mm pulley belt) and one slightly shorter screw (+/- 22 mm) for tightening.

The lower part of the screw, it simply requires two M5 screws and nuts.}

Tags