1 / 1
1itt1e Macropad - Print Files
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for 11-Key QMK/VIA compatible macropad with an OLED display based on the rp2040.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v2.0
Required Parts:
- 11 CherryMX style switches
- 11 Keycaps of choice
- Raspberry Pi Pico (1) or equivalent
- SSD1306 128x64 OLED display (I2C)
- Small wire
- Soldering tools and supplies
- Glue, resin, or tape
- Hotswap connectors (Optional)
- Rubber Feet (Optional)
- XXX No Diodes Needed XXX
Print settings:
Layer Height- 0.2-0.12mm
Infill Density- 25% or more (the higher the better it will sound)
Support- Preferred on the ‘1itt1e_case’ file (for the USB hole)
Build Order:
- Get above parts, print files, clean case
- Clip or de-solder pins from OLED
- Sand OLED cutout to fit your OLED perfectly, then glue** it in place from the board
- Put switches in place, place on hotswap connectors if desired
- Wire OLED and switches to pico as seen on the github instructions
- Place Pico in its slot
- Squish case together (yes, just press it together)