Flat Shelly and Wago bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flat holder for Shelly WiFi Smart Switch and Wago connection clamps
- Rating
- 0 / 5
- Likes
- 52
- Downloads
- 68
- Makes
- 0
- Views
- 1,526
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Descryption
I needed a flat holder for a Shelly smart switch and some Wago clamps to connect three lines of LED spots to one Shelly and to fit it inside a purlin of my winter garden. The holder is attached to the purlin using double-sided adhesive tape. The cables can be fastened with small zip ties.
Dimensions
- Length: 102 mm
- Width: 87 mm
- Height: 22 mm
Print settings
- Material: PETG
- Nozzle: 0.4 mm
- Layer height: 0.2 mm
- Infill: 20%
- Brim: Yes, if printed in an upright orientation
- Supports: Yes
For maximum mechanical strength, I recommend printing the two-piece version upright (see pictures). A one-piece version is also available.
License Note
My non-commercial use restriction applies only to selling products based on my design. If you have any doubts or questions about this, please contact me.