Flat Shelly and Wago bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flat holder for Shelly WiFi Smart Switch and Wago connection clamps
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1526
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Descryption
I needed a flat holder for a Shelly smart switch and some Wago clamps to connect three lines of LED spots to one Shelly and to fit it inside a purlin of my winter garden. The holder is attached to the purlin using double-sided adhesive tape. The cables can be fastened with small zip ties.
Dimensions
- Length: 102 mm
- Width: 87 mm
- Height: 22 mm
Print settings
- Material: PETG
- Nozzle: 0.4 mm
- Layer height: 0.2 mm
- Infill: 20%
- Brim: Yes, if printed in an upright orientation
- Supports: Yes
For maximum mechanical strength, I recommend printing the two-piece version upright (see pictures). A one-piece version is also available.
License Note
My non-commercial use restriction applies only to selling products based on my design. If you have any doubts or questions about this, please contact me.