1 / 4
Core One Purge Bin if using a right side Wiper from S3BR4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Purge Bin with a cutout for the right side wiper from S3BR4, without magnets, is placed on two screws on the bottom
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 130
- Makes
- 7
- Views
- 741
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Purge Bin with a cutout for users of the right side wiper from S3BR4. It is placed onto the two ‘alignment’ screws on the bottom of the core one, so that the bin can't move around but can very easily be taken out and in, no magnets needed.
Parts needed: two M3x4mm screws. (also any leftover scew M3 from 6 to 12mm will do)
In the picture below you can see the left side alignment scew and the ring holding the bin in place.
