UNIVERSAL Filament RESPOOL - Rewinder

YES, again next Filament Respooler , BUT…. like always, I dont like complicated things,  i used an idea from others , but i did printable almost without suports. and also more stronger. My print from others was weak, lot of suports and lot of parts, include printed axles, parts what need to be truly good conected for other parts was just glued or secure with smal bolts, what i seen like totaly weak. Maybe isnt look like machine from 1900  iron casting, but working, strong enought and totaly universal. Printed parts are secure and asembled togheder with bolts and glue. Not just one size of spool.  I using spools from many companys, include refil spool, witch have different holes, different width. from diameter 52mm till 72mm and from width 40mm till 80mm. machine like this i didnt find anywhere in webs. Simply you add the spool rod and berings and leg slide in position where you need . 

I printed whole structure from PLA 15% infil, and gears , slide mechanism and handle are 30%.

main axles are M8 threaded rod and bolts M8, secure with M8 nuts .  for other helping conections are used M3 bolts and nuts.

on gif you can see how its asembled togheder, and the rest of .. you need find by self. 

material used for: 

threaded rod M8  :  lenght - 145mm    1x

                                                 190mm    1x

bolts M8                                  70mm      1x

                                                  60mm     1x

                                                  50mm     1x

bolts M3                                   25mm     3x

                                                   20mm     2x

                                                  30mm     3x

nuts M3                                                    6x

nuts M8                                                    16x

hot internal thread M3       (4x4)             6x

bearings  608 (22x8x7x)                        11x

some srews for conecting to the base wooden bord 

and two rubber bands for secure spool axle. (did I find as not neccesery ) 

for the spool holder are designed for 150mm in lenght  HT40, who have no idea what HT pipe is, its 40mm PVC pipe for dirty water. 

all are manual, but iam sure will become someone who will create motor device for . 

Enjoy this project