Bonne Maman cap box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use with standard 85 mm screw cap (Bonne Maman marmelade jars).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 1
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Use this model with a standard 85 mm screw cap you can find on jars like Bonne Maman marmelade and some vegetables.
Use it as a biscuit box (perfect diameter for Prince Choco), or any storage you want. Also perfect for 3dconnexion 3d mouse.
Several heights available from 20 to 200 mm.
/!\ You should print only the last 10 mm to check if the screw is OK on your machine before printing full height. If necessary, adjust X and Y scale to make it perfect.
I used these parameters, on Cura it made a nearly continous print (no infill within the screw) => no stringing even in PETG :
- 0.4 mm nozzle
- layer height 0.1 mm (if your slicer has adaptative layer, use it to save time !)
- Wall line width : 0.45 mm
- Wall line count : 3
- top layers : 0
- bottom layers : 8
- infill : 0%