1 / 1
TPG2200 Pager Charging Station Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall mount for the MOTOROLA TPG2200 pager charging station
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
About
This is a mount for conveniently attaching the MOTOROLA TPG2200 charging station to a wall.
Because the charging station unfortunately has its USB-C port on the back, you will probably need a USB-C angled adapter to nicely route the cable. The wall mount has some zip-tie channels on the side to secure cables.
Additional Hardware
You will need at least 2 screws to attach the mount to the wall, see dimensions below.
Additionally, an angled USB-C adapter is required to route the charging cable.
Dimensions

Recommended Printing Parameters
| Orientation | Print in the provided orientation of the STL files |
|---|---|
| Support Material | Print without support material |
| Layer Height | 0.2 mm |
| Nozzle Diameter | 0.4 mm |
| Perimeters | 3 |
| Material | PETG |