1 / 1
TPG2200 Pager Charging Station Wall Mount — zdjęcie 1

TPG2200 Pager Charging Station Wall Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wall mount for the MOTOROLA TPG2200 pager charging station

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

About

This is a mount for conveniently attaching the MOTOROLA TPG2200 charging station to a wall.

Because the charging station unfortunately has its USB-C port on the back, you will probably need a USB-C angled adapter to nicely route the cable.  The wall mount has some zip-tie channels on the side to secure cables.

Additional Hardware

You will need at least 2 screws to attach the mount to the wall, see dimensions below.

Additionally, an angled USB-C adapter is required to route the charging cable.

Dimensions

Recommended Printing Parameters

OrientationPrint in the provided orientation of the STL files
Support MaterialPrint without support material
Layer Height0.2 mm
Nozzle Diameter0.4 mm
Perimeters3
MaterialPETG

 

Tagi