1 / 2
Kitchen Cabinet Paper Towel (Zewa) Roll Holder — image 1
1 / 2

Kitchen Cabinet Paper Towel (Zewa) Roll Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holder for a paper towel (Zewa) within a kitchen cabinet for easy roll-off and access.

Rating
0 / 5
Likes
3
Downloads
15
Makes
0
Views
105
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

The print is divided into two parts. This way it can fit on a Bambu A1 printer, and the holder can be adjusted to fit different width paper rolls.

It is designed to screw into the existing holes found in kitchen cabinets (usually these holes are for the little shelf holders). It's also set back a bit in order for it to hold fresh rolls and still allow the cabinet doors to close. The mounting holes are spaced 64mm from each other. I used two 6x13mm euro screws to screw it into the existing cabinet holes.

I recommend printing the main part in PETG and with a wall strenth of 4, so it is pretty robust. You can print the second part in PETG or PLA, strength doesn't really matter here. Make sure to print at least the main part horizontal, otherwise it won't be as robust and strong.

Tags