Cover to replace a glass Butter Dish cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another 3d printed top/cover to replace yet another shattered glass cover for a butter dish.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
The top/cover of our glass butter dish/tray slipped out of my hand, crashed to the floor, and broke. Unable to find a replacement for the same dish, I created a 3d printed cover using FreeCAD.
This one was designed for a 150 mm x 85 mm dish/tray, but it should scale easily in either x or y.
The original glass cover had a “bead” at the bottom that kind of mated/sealed along a similar bead on the tray itself. So I mimicked that in my design.
If I ever print another one, I would add some horizontal protrusions/bumps or iidentations along the long side, about 2/3'rds of the way to the top to give you fingers some purchase on the cover. (I don't see any reason to add text saying “BUTTER” on it.)
I printed in translucent PETG. If you print at a very slow speed (20 mm/s) with dry filament, it will come out clearer. (I printed this at 80 mm/s.)
Print upside down. (No supports.) I used a 0.4 mm nozzle and 0.6 mm wall thickness. 0.28 mm layer height. I used 5 walls so that there's no infill to see.