Pavo20 Walksnail Mini V3 Head
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a custom head/FPV mount for the Walksnail Avatar Mini V3. It has M3 mounting holes (20x20mm) for the VTX and…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a custom head/FPV mount for the Walksnail Avatar Mini V3. It has M3 mounting holes (20x20mm) for the VTX and is designed to snugly fit the antenna. The camera fits when using the 19mm adapter and can pivot from 0° to ~30° before it starts to hit the cross brace.
It has built in supports that need to be cut away on the sides. There is no support for the thick cross brace in the center however it is a short gap and doesn't really need support. You can turn on "supports on build plate" if you want to add a support to it.
This should be printed in PETG but PLA would do in a pinch.
Category: R/C Vehicles