1 / 8
Shimano Telescopic Rod Travel Guard (Print-in-Place) — image 1
1 / 8

Shimano Telescopic Rod Travel Guard (Print-in-Place)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print-in-place case for Shimano STC; protects guides, stops extension. With carabiner ring and strap slots.

Rating
0 / 5
Likes
18
Downloads
43
Makes
0
Views
373
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

I made this protective transport case for my Shimano STC (stcmts24l) telescopic rod and figured others might like something similar.

It’s not perfect, but it does exactly what I need: it shields the guides, keeps the sections from extending during transport, and gives multiple mounting options - a ring for a carabiner (or similar clip) plus both horizontal and vertical slots for straps. Inside, small cutouts and gentle bulges help hold the sections in place and reduce the chance of the rod “creeping out” while you’re on the move.

Although it’s designed around my specific rod, I’ve included photos with measurements so you can quickly check if it will fit yours as well.

The case prints as a single, print-in-place part, so a well-calibrated printer really helps; I also designed custom support features directly into the model, so you don’t need slicer-generated supports.

Heads-up: those built-in supports are intentionally a bit firm. My tip is to first close the case so the rings become one solid loop for extra rigidity, then use a pair of pliers to carefully rock each support tab back and forth until it releases. If you’re patient, the supports should come off cleanly, leaving minimal marks and a tidy finish.

Tags