43mm socket (1/2in drive)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.88 – €10.85 net (excluding VAT)
For file: 43mm_0.5in socket_0.4n_0.2mm_PLA_MINI_8h18m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.87 excluding VAT (range midpoint).
- Weight reported by the author
- 156 g
- Print time reported by the author
- 8.31 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a model of 43mm socket for a 1/2in square drive wrench. Will be of plastic: for use on non-critical equpment!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Public Domain
Do understand this will be built from plastic and not as strong, as you may expect. Good enough for boiler anodes and some large non-critical bolts/nuts and for general home plumbing.
To be printed with 100% infill.
I added a sample slicing file from my prusa Mini, but slice for your own filament and printer. If you know your printer has large runouts- increase the scale by 0.5-2%