Prusa MK2S & MK3/S feet (for sorbothane dampeners)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Feet for gluing sorbothane dampeners to the printer
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
MK3/S
You will need the following for each MK3/S foot:
1x M4x10 button head screw
1x M4 nut
1x T-Nut ("TNut_3030_M4")
1x Foot of your choosing ("Foot_3030_XXmm")
They will require a T-nut (remixed from: https://www.thingiverse.com/thing:2762571 ) to be inserted into the extrusions, the foot/disc is then screwed into place and then you can glue the sorbothane dampeners to them.
-------------------
MK2/S
I remixed these feet (from: https://www.thingiverse.com/thing:2284645 and https://www.thingiverse.com/thing:2076126 ) to better suit my needs. In my case for 30mm half-sphere sorbothane dampeners.
But since I was fiddling with them anyway, I also added 40mm and 50mm versions.
-The main feet have slots for a zip-tie, so that it can be attached to the printer without tape/glue.
-The frame feet was just slightly modified to make them clip on to the frame itself. Just enough so that they don't fall off when lifting the printer.