Spool Holder for 10kg Bulk Spool

Update 5MAR2021: Added 30mm diameter spool holder. Print 30MM Core 1, 30MMCore 2, and 2 30mm DIA ends. Verified with zyltech 5kg spools.

Here's a spool holder I designed for 10kg filament spools from push plastics. This spool holder allows you to feed your 3d printer DIRECTLY off of the 10kg spool! I bought the spool here: https://www.pushplastic.com/collections/3-kg-bulk-reel/products/pla-10kg-22-pounds

See the build guide here: youtu.be/9XBuF4Nzlkc

Bill of Materials:

3D Printed Parts:

1x 1-roller

1x 2-roller_m

2x 3-corner

1x 4-corner_riser

1x 5-corner_riser_m

1x 6-spool_core (OR 1x 6.1 and 1x 6.2 if your printer isn't tall enough or you have bed adhesion issues with 6)

2x 7-spool_ends

Hardware:

8x 608 bearings

1x 6.35mm(1/4") rod (265mm or greater in length, aluminum or steel)

4x m8x30mm buttonhead bolts

1x 2 meters 2020 t-slot (or v-slot) aluminum extrusion (cut to: 2x 300mm, 2x 370mm 2x250mm)

26x m3x10mm button head screws

26x m3 hammer t-nuts

I sourced all my materials off of Amazon except for the aluminum extrusion which I purchased from zyltech (they have a cutting service and can cut your pieces to exact lengths if you like)

I have chosen to license this as creative commons with commercial use allowed. If you chose to use this commercially and it benefits you or your company, I would like to request if possible that you could please provide a donation to what we do at SNR Tech bytes so we can continue making things for everyone! Visit snrtechbytes.com/donate

Print Settings

Supports:

Yes

Resolution:

Infill:

20%

Category: 3D Printer Accessories