Magnetic Purge Line Remover 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bigger version of Magnetic Purge Line Remover
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 53
- Makes
- 1
- Views
- 113
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🚀 Support My Work🚀
If you enjoy my designs, you can help me keep the creative spark alive:
Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎
Like & Download: Your engagement helps my models reach more people.
Buy Me a Coffee: If you'd like to support my work and my family more directly.
📖 Description
Keep your print bed clean and tidy with this simple yet effective Purge Line Remover.
If you’re tired of picking at the bed with your fingernails or using a metal spatula that risks scratching your PEI sheet, this tool is the essential utility you’ve been looking for. Designed to flick away purge lines and prime blobs with a single swipe, it keeps your workspace professional and your build plate pristine.
No more filament stuck under your fingernails or hunting for a misplaced scraper. This ergonomic tool is the small upgrade that makes a big difference in your daily printing workflow.
Why this is a must-print:
Magnet Integrated: My custom upgrade includes a dedicated slot for a 3x6mm magnet, so you can snap it directly to your printer’s frame or any metallic surface. Never lose your scraper again!
Bed-Friendly: Perfectly angled to lift filament without digging into your build plate’s coating.
Ergonomic Grip: Small, lightweight, and shaped to fit naturally in your hand for quick "print-and-clear" actions.
🛠 Technical Specifications
Magnet Slot: Optimized for a standard 3mm x 6mm neodymium magnet.
Design: Slim profile for high portability and easy storage.
Compatibility: Works with all FDM print surfaces (PEI, Glass, G10, etc.).
🖨 Recommended Print Settings
Layer Height: 0.12mm is highly recommended for a smooth edge and better feel.
Supports: Only required inside the magnet hole. The rest of the model prints flat for a clean finish.
Material: PLA or PETG work perfectly. If your printer is in a high-temp enclosure, PETG is the better choice.
Wall Count: 3 walls for maximum durability during scraping.
Infill: 15-20% Grid or Gyroid.
📦 Bill of Materials (BOM)
To complete this Purge Line Remover, you will need the following:
Magnet: 1x 3x6mm Circular Neodymium Magnet.
Adhesive: A tiny drop of superglue (CA glue) to secure the magnet permanently in the slot.
Stop picking at your bed and start cleaning like a pro. Download and print your magnetic purge remover today!