Counting matching models…
Dummy 13 has won 3D Model of the Year! Thank you so much to the judges and everyone who voted. TL;DR This is Dummy 13, a printable action figure. It was a work in progress for a while and now this is the finished product. It's still a…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
This Silica Box is for the AMS Hydra Mod , but it also works perfectly with the standard AMS. It fits perfectly and the volume is larger than in other versions. There are also versions that support a Hygrometer. This is the Hygrometer I…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design. Version 2+ , added March 15, 2024 incorporates slightly smaller filament clasps and reverses the two…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
This is a remix of this bag clip: https://www.thingiverse.com/thing:4027950 which goes back to https://www.thingiverse.com/thing:3238736 . Modifications are: 1) The insert has two stops. One prevents it from falling into the bag and the…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
Wargame Walls Fan Room Version 2 Section 15 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Print approx. €7.11–€8.68 excl. taxPreliminary estimate for one variant
Available in two versions: 15cm / 6in 10cm / 4in Now you can make perfectly parallel lines on your paper, woodwork, etc. In addition to the horizontal distance (15cm/6in or 10cm/4in), I added markers for vertical distance between lines (…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Star Wars Chopper: Thick Mini Version. Added an even thicker version (2/11/2025) Aptly nammed “Chopperthick.***” Small parts should be more stable. Thanks Ben for the feedback!
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Lean version of a USB cable holder prints of various hight are possible by just finish printing at the desired thickness. No support needed. PLA material used, 0.2mm resolution. 12mm printing height requires 9 Min. printing time @ 100%…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
This submarine was modeled after an Ohio class sub and named after me! Print with organic supports everywhere. This sub can carry up to 12 Trident II D5 submarine-launched ballistic missiles (unlike the 20 missiles the real models use).…
Print approx. €1.27–€1.56 excl. taxPreliminary estimate for one variant
In Anlehnung an mein Modell " Abdeckung Heizungsrohr/ Cover heating pipe " habe ich diese neue Version konstruiert. Das Modell sieht nun etwas gefälliger aus und ist für verschiedene Rohrdurchmesser erhältlich. Es werden keine Schrauben…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
This model is printed in vase mode at 0.4mm and then turned inside out. This toggles back and forth between a “demon lord” and a bunch of hearts. Share it with someone who will be pleasantly surprised. Other heart designs I have made.…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
I designed this super light weight payload holder for the Mini 4K to carry loads suspended with two lines to keep the payload from twisting. I printed with PETG 100% infill, 3 perimeters. It snaps in place at the center of gravity. I have…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by the Drybox humidity sensor mount by RobMagus (link is under original model) I created a mount which is better fitting for metric nuts and bolts. The mount holds a cheap LCD temperature / humidity sensor and can be attached to…
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
Jaw Inserts for bench vice (universal version) When I designed and created jaw inserts type for bench vice YORK 80 (" https://www.prusaprinters.org/prints/2449-jaw-inserts-for-bench-vicevise-york-80 ") so I designed and created universal…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for PETGSource material: PET
This is a hanging mount for the Original MMU2(s) Filament Buffer. [PC4-M10 Version] Features: Quick & Easy to load Reuses most of the original parts Keeps the Buffer out of the way Clean simple filament path to the MMU2(s) (Prevents MMU…
Print approx. €8.65–€10.57 excl. taxPreliminary estimate for PETGSource material: PET
RJ-45 Network Jack Dust Cover Plug Wanted a good one, ended up designing my own. I wanted something that emulates a RJ-45 plug and stays in place. Sample blue parts printed in Polymaker PRO PLA. Tab actual locks parts in place. Tab also…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 2pcs. and 4pcs. stacked version. We have made a 3mf file with the right settings - especially for the transition between the two Shields.…
Print approx. €6.33–€7.74 excl. taxPreliminary estimate for PETGSource material: PET
Since all of the feet I could find were for the dGPU version I quickly modeled one for iGPU, because I couldn't get proper airflow when using on bed. Now it works perfect.
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
standing initial: letter R
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
EN: This is an ergonomic handle for converting an inexpensive Chinese telescopic slingshot (see last two pictures). Thanks to the brilliant OpenScad script by Anachronist aka Amatulic , I was able to create a handle that fits perfectly in…
Print approx. €4.98–€6.09 excl. taxPreliminary estimate for PETGSource material: PET
With a Curved back and shortened overall length. 22 Degree Stand for Make Noise, Erica Synths, ALM, or other single row skiff / cases. Making music is much simpler with your Euroracks single-row cases at a splendid 22.5 degrees. No…
Print approx. €4.84–€5.92 excl. taxPreliminary estimate for one variant
Here is a sheet of the hoodoo hex pattern, wilI l update it with a few sizes and the parametric model when done.
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
This is an additional hook to be mounted on an IKEA Trotten desk (the fixed version, not the height adjustable). It's made to be placed on the side, between the legs of the desk, using the two big sleeve screws from underneath. The design…
Print approx. €2.36–€2.89 excl. taxPreliminary estimate for one variant
A quick and dirty designed cover for the rear right corner of the PrusaBox. This version comes with holes for cables. You need two 8 x 4 magnets. It looks like this on the left side: It is designed to use with my magnetic cable duct (see…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
The bottom circles diameter are 22mm and 13mm Tested print settings : Tested material is PETG and is very strong In the bottom part 80% infill, in the rest part 50% infill Set supports everywhere Set 5 perimeters
Print approx. €4.43–€5.42 excl. taxPreliminary estimate for PETGSource material: PET
Prusa Advanced Filtration System Conversion Kit for CORE One This conversion kit allows the Prusa Advanced Filtration System originally designed for the Enclosure to be used with the Prusa CORE One. It provides a practical way to reuse…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for PETGSource material: PET
An alternative baby phone bed mount for the baby phone Philips Avent SCD845/26: The holder can be mounted anywhere on the side of the baby bed. In addition to the two parts, you need four M3 screws with nuts. Suitable for baby beds with…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
Part of a series of invertible curves . In trying to better understand what happens to a closed curve when inverted, I designed a couple of simple tests for circles. Pure math predicts a symmetric solution, but the curve has to pass…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
NOCH IN BEARBEITUNG Hi, anbei habe ich eine Smarte Lightbar mit WLED erstellt. Nach dem Vorbild von govee und den anderen Herstellern. Benötigt werden ein Wemos D1 Mini, Ledstreifen (WS2812b) die zwei Druckteile und ein 5V Netzteil.…
Print approx. €8.10–€9.90 excl. taxPreliminary estimate for one variant
This Simple (smooth) Version is easier to assemble and print. This is my interpretation of the Energy Blaster or Energy Pistol used by Alexia Harmon in the final battle from the book "The Defender" by Larissa Soehn. The book describes the…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
Print, assemble and play directly, no screws needed 8-11
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
I'm very excited to introduce you to the new and extra long Glorious Baby Dragon! Longer Dragon = more Fun! It has so many articulated parts, so amazing! Length: 93cm / 36,6Inch Luckily, I arranged the parts to use as little printing area…
E3NG / Ender 3 NG version 1.2 !CAUTION! Reprint and replace the electronics_DIN_rail_PSU_24V.stl from the bacpack + electronics folder if you already have the older version. The old design can in extreme cases cause the mounting screws…
This is a 7-pack of head parts designed for Dummy 13 version 1.0 Due to design changes in the frame parts, the head part of Dummy 13 beta version is not compatible with the head part of version 1.0. Update: [28/09/2024] I have uploaded a…
This is a Heat Insert Mod of the great DIN Rail Bracket from Fabian. M3 Heat Inserts up to 5.7mm can be used. If you want to create your own mounts for it - hole distance is 52.5mm. I will also publish several mounts I created.…
Deutsch: Das ist ein Schleifpapier-Block passend zu den Schleifpapier-Rollen mit einer Breite 25 mm (1 Zoll) oder auch zum selber zuschneiden dafür etwas breiter in 300 x 40 mm. Für den leichten Zusammenbau benötigt man nur noch eine…
This is a Charizard sculpture based on its original artwork on the cover of the (western version of) Pokémon Red Version. It was originally meant to be a display stand for a Game Boy cartridge. However, since I didn't want to stray too…
I wanted a gridfinity hex bit holder, there are a few available on Printables but none that quite had all of the features I wanted. I found the closest I could and remixed it to make it stackable. In gridfinty language this is 2x2 and 6…
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…
I took David6722's genious OTF Design and tweaked it a bit, I added places for screws, a pocket clip, altered the button and made a few more improvements. Prints very easily but may need some supports on the newly created overhangs. Print…
Remix Dummy 13 Weapons Pack Version ORIGINAL: https://www.printables.com/model/681425-dummy-13-weapons-pack-version-20
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts and the box itself (number of rows/slots) can be modified in Fusion 360 (f3d file available in the files section). IMPORTANT: If you want to…
Copyright Please note that this model is a remix of a printable posting I originally found in the library of User @M7MD5115 . The original model has been removed though, creating a possible violation of the Creative Commons Attribution…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
UPDATE 12/2025 As some users reported that the springs become weak after a while, I reinforced them. I didn't test them so far, as my original version still works fine. But I hope, this improves the model and I'm looking forward for your…
This attachment enables a spray can to spray a stream of Oil/Wax or Brake-fluid directly and only to the chain (i.e. avoiding overspray onto bike frame , tires and disk rotors) , less mess, less waste and more time to ride…….. I am blown…
Use my simple program to create fantastic switchable business cards. Before using the program, you need to prepare two images. The Program lets to combine the images to switchable card. Here is the link to download free version of the…
Stackable Storage Bins with Modern Honeycomb Pattern Introducing our versatile 3D-printable stackable storage bins, designed with a sleek modern look and a distinctive honeycomb pattern. These bins are perfect for organizing a wide range…
I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…
The original version was too angular, so I made it smoother and removed a few flaws.
CHANGELOG Main Instructions follow. 30/10/25 - Added spoolholder_spindle_mk4, spoolholder_roller_mk4 and buffer_mk4 by request. To keep things simple, these versions cut away some material to get them to fit on a MK4 bed. Reported to…
Heyho :) Here is a tensioning device for the belt of the Y-axe. I have tested at least 4 different designs myself but was never really satisfied. Either the designs were too clunky, not nice to print, you had to drill holes or the…
I really liked the idea from Boogie for screw measuring/sorting helper but decided to design my own with some of his approach in mind. FEATURES size of a credit card so you can put it in your pocket or a wallet screw sizes M2 - M12 screw…
This one is just a little bit smaller than the original one. It holds the nipper better. If it doesn't fit the nipper, you could first warm up the walls with a lighter. From my experience, it creates the best fit. Category: Tool Holders &…
This project is based on the excellent work of MakerWorld user PandaN , who shared a method for adding wood grain effects to 3D prints using a modifier mesh shaped like a log. However, the original 3MF is only compatible with Bambu…
use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports ANGLED version to be printed upright STRAIGHT version to be printed flat on bed use 4…
These are parallel pliers that you print in place. No supports needed, no assembly, they work as soon as you pick them up off the build plate. You will need to have a printer with decent bridging as there are some long ones in this print.…
Support-Free Remix of Iron Man Gemini Suit (Mark 39) . This is a support-free FDM friendly remix of the model by abaiao. Original Model: skfb.ly/ACpn No supports are required anywhere in this remix and it can be printed very easily. Check…
CHECK OUT THE IMPROVED VERSION HERE Description This is a toy Automatic OTF Knife I designed. What makes this design different from a typical switchblade is that it not only ejects the blade when the switch is pushed forward but retracts…
Experience the perfect companion for your iPhone with our versatile standby dock. Charge your device and use it as a clock, alarm clock and organiser at the same time. The dock is available for iPhone 14,15,16 models - simply connect your…
A modular 19-inch rack mount for the Unifi UCG-Ultra, UXG-Max, and UCG-Max lineup. OBS.: The UCG-Max processor reaches 75~ 90 degrees Celsius for normal use, and the bottom can get REALLY HOT . So use filaments with higher temperature…
Spooky spider fridge magnet If you like it --> press like it :-) Here a model of the famous spider model from Jason C Kessler. I´ve added two sockets for magnets 5x3mm. Just make a pause at the top of the installation space(look before in…
The original adapter by @MaxT has a very tight fit on my two Tripp Trapp Stokke chairs from 2020 and 2015 with IKEA Trofast plastic storage boxes from 2024. This remix adds a total of 3mm of extra width (1.5mm on each side) compared to…
This design is a WIP. Things will change and alterations will happen. I made this design in TinkerCAD over about 2 weeks. This springlock design is based off the ones seen in the FNAF movie that killed William Afton. The ribcage-like…
This model is a remix that adds a couple features. Three version are available. One with a deer silhouette, original, and deer silhouette with peg for holding your bow release. The hanger will hold over 25lbs. Happy printing
Heyhoo Here I have a new Container for you :) Perfect to store away some dry stuff like Coffee or other things! In addition to the obvious, that the container is as well sealed as possible, I also took great care to ensure that it is very…
NOTE: To print this model correctly, after importing the .stl into your slicer, you must split it into objects. If you don't, the slicer software will likely make the 0.1mm button part of the body, making separation impossible. The method…
Hand out goodies with STYLE during Spooky Season! Leave on display or as fun snack bucket the other seasons. This life sized skull and brain was remixed and designed for good printability and handling when on the go. Adding lighting to…
The design is fully tested but the documentation is work in progress, Please message if there any queries. Last edited 24\09\23. Attribution & Credit to the Voron Design Team I am not quite sure if this can be classed as a formal remix…
This design will allow you to adapt any corded power tool, allowing it to be used with the Festool Plug-It power cord system. This was designed so that it can be printed with no supports needed, and I specifically wanted the main body to…
A modern football helmet reimagined as a clean, single-color 3D printable model. Designed with bold raised center striping, the signature three-stripe pattern is extruded directly from the shell to create strong depth, shadow, and tactile…
V2: Remix of Toymakr3D's G1 Megatron to look a bit more like TF: Devastation Megatron (Permission granted). A majority of the files have been updated. Original file: https://www.toymakr3d.com/product/10-gunmaster-not-g1-megatron Support…
If you have the Matcha expansion, you might be interested in my insert that adds support for Matcha . UPDATE 12/23/2023 Based on feedback I've received and my own continued use of these models, I have updated two of the boxes.…
Replace your old cracked PU armrests to with new memory foam Cloud Swap armrests. I used 12mm x 2mm magnets. They are press fit for me, but used some CA glue to keep them in place permenantly. Trim off the tabs on the perimeter used to…
A better more robust version of the GoPro tripod mount (with an editable file) This GoPro tripod mount design provides superior strength and durability and outperforms all vertical designs. Optimized for the strongest printed orientation…
Size cca 85x60x55mm. Design versions A, B, C, D. Versions for max. Phone depth 9, 11, 14, 17, 22, 27mm. Tested. Second version:
Introducing my Jinx Chompers! Update: Decided not to opt for a paid file. This is my first proper upload! Changed to Simplified and Enhanced Versions. Both available for free. Please give me some feedback on the design :) Designed with…
A beautiful interplay of simple lines combined with regular geometry in a retro Miami style. Bring the 80s back into your room with this model and have fun printing ;) Make sure to download, leave a like and take a look into my other…
[V3 available now on MakerWorld: https://makerworld.com/en/models/1521236-phone-holder-for-hammocks-tents-rope-lines It's now even smaller and all tolerance issues are fixed] Hammock Phone Holder V2 - Now even lighter! New updated…
This is a remix of the linear rail X-Axis conversion kit by SnakeP on thingiverse . It's different in 4 ways: a bit easier to install (comes in two parts - no worries, it's still incredibly strong) the top can hold any upgrade the user…
These are templates for my ski drill jig (found here ). If you have a printer that can work with bambustudio or orca slicer and want to use a my print profile with settings and pre-colored text (There should be profiles for 9.0, 9.2, and…
Update 2024/11/01: Added some new file versions for coarse or regular M3 size screws without requiring heatsets. Update 23/11/06: Added “Rev2” versions of interface, shell, and cap files. These are mostly minor updates to clean up the…
It needs two screws with a cross section of 5 mm and a body diameter of 2.5 mm Update: New model (v2) added with less filament consumption. In the new model, the triggers do not hit the wall and there is also a space to attach a bumper so…
Hello there, Couldn't find any SL-8 / SL-9 Stock conversion for my G36 GBBR build, so here is my G36's Project - Futuristic CQB/DMR Conversion set. Should fit on most G36s, but built on WE G39 999c IdZ GBB. Won't fit JG's G36 (JG6…
A case for the Orange Pi 3B. The case has a holder on the side for the Orange Pi external wifi antenna. My board is OP 3B V1.1.1 and it fits perfectly. May not be compatible with newer board revisions. 30/04/2024 V1 Update to include…
This is a new parametric of the classic model that you know and love the Drilling Tool and Dust Collector! I have redone everything in Cad for a better look and function! Now, by downloading the Fusion 360 files, you can customize it to…
Solidworks parametric Box - Credits to original creator Design As I mostly use Solidworks as means of design, I wanted to be able to use and adapt the box more easily for personal use. The model was interpreted from the original…
Top is easily replaceable in case of damage. I included 2 styles of followers. The standard one which is the style my older Black Dog machine mags have. Follower 2 is similar to the CMMG follower and will catch the bolt when empty. Both…
Made out of Rosa3D PET-G (not a surprise ;)) weights around 57 grams and takes 2,5 hours to print in 0.24 layer height and some speedy profile setting. The project keeps flat surface for a label sticker, yet lacks the graduation for…
Small Ergonomic Handle for Deburring Tool - Deburrer Tool - Mini sbavatore NEW VERSION This new version is much sturdier than our old one Optimized profile for better resistance and ease of printing Optimized filament usage Recommended…
I made this one for the small toothpaste tubes that always seem to run out on a trip. The big version works for a normal tube at home, but this travel version is sized for the mini tubes I actually pack. I included two sizes, so it fits…
Made some remix,and modify a 14cm version
![Jaw Inserts for bench vice[vise] (universal version)](https://media.printables.com/media/prints/2452/images/15629_ee6f5f2b-b733-46ea-b26d-e73666b1b56f/js_3dt-vice_asm_uni_jaw-inserts.png)
![[OUTDATED] Transformers Devastation Megatron Conversion Kit](https://media.printables.com/media/prints/334966/images/2870511_8a181cee-b6c4-4097-b803-e5ad1a9b22af/large_display_2f5fea00-e34b-4f0e-9d44-10b9cc1c2fc0_334966.jpg)
![Hammock Phone Holder V2 [Old version, check description for new one]](https://media.printables.com/media/prints/582669/images/4663470_91478c1f-81a2-4074-8058-87f119204b7e/lighterhanger-v21.jpg)
