Chipquick SMDLTLFP 982A adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed an adapter today for a 10ml Syringe and for a 5cc 15g Chipquick Solder paste syringe. These both seemed to…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I needed an adapter today for a 10ml Syringe and for a 5cc 15g Chipquick Solder paste syringe. These both seemed to work out well.
I drilled out the hole to get a tight fit on 3/16 brass tubing as the air connection to the 982A. I doubt a 3d printed connection that small would provide a secure mount without breaking off.
You could drill the hole to you tubing size and just glue it in with CA as the pressure I use is seldom above 20psi.
They use 1/16 o-rings. The Chipquick one has a 3/8x1/2 and the 10ml syringe uses a 1/2x5/8.
Cheers
Kisssys
Category: Electronics